Bel Air® Halo
HANGING THE FAN
Step 9. To hang the fan body in the canopy, hold the fan body firmly and insert the ball into the canopy opening. Check that no wires were pinched. Rotate the fan body until the slot in the ball fits into the pin opposite the canopy opening.
Dimensions: |
|
Weight: | Height |
32 lbs | 18 1/2” |
ball
slot | pin |
CANOPY ELECTRICAL CONNECTIONS
Step 10. Attach the fan wires to the ceiling fixture outlet box wiring by twisting the bare ends of the wires together and then securing with a wire nut.
Connect in this order:
•GREEN leads from mounting plate and fan to GROUND conductor of power source. Secure with wire nut.
•WHITE wire from fan to white NEU- TRAL wire in ceiling fixture outlet box. Secure with wire nut.
•BLACK wire from fan to black (or red)
POWER wire in ceiling fixture outlet box. Secure with wire nut.
BLACK wires
(2)
WHITE WIRES
(2)
GREEN WIRES
(3)
wire nut
CANOPY HATCH INSTALLATION
Step 11. Tuck the wires into the canopy with the wire nuts pointed upwards, so that the WHITE and BLACK wires are on opposite sides of the canopy and all wires are clear of the canopy opening.
Step 12. Install canopy hatch with the last canopy screw and lock washer. To do this, tilt the fan body away from the hatch opening.
Step 13. Straighten the fan, then check to ensure that there is no movement between the canopy and ceiling or
canopy
hatch
canopy washer 
canopy
screw
tilt the
fan to
install
last
canopy
screw
7