OPERATION
7.2 Blade Pre-Operation Inspection/Service
Before each blade use, a complete inspection and service is required to ensure the blade is in a good and safe working condition. Damaged and/or broken parts should be repaired and/or replaced immediately. To ensure the blade is ready for operation, conduct the following. OPS- 0020_A
The operator’s manual and safety signs affixed on the unit contain important instructions on the safe and proper use of the equipment. Maintain these important safety features on the implement in good condition to ensure the information is available to the operator at all times.
•Ensure the manual canister is secured to the equipment with the operator’s manual inside.
•Ensure all safety signs are in place and legible. Replace missing, damaged, and illegible decals.
300 Series 09/10 | Operation Section |
© 2010 Alamo Group Inc.