Bush Hog 2297 manual Rops and Seat Belt, Tractor Lighting and SMV Emblem, Tractor Ballast

Page 49

OPERATION

Tractor Requirements and Capabilities

•ASABE approved Roll-Over Protective Structure (ROPS) or ROPS cab and seat belt.

•Tractor Safety Devices ................. Slow Moving Vehicle (SMV) emblem, lighting

•Tractor Ballast ............................... As required to maintain 25% of gross weight of tractor, loader and bucket load on rear tires

3.1ROPS and Seat Belt

The tractor must be equipped with a Roll-Over-Protective-Structure (ROPS) (tractor cab or roll-bar) and seat belt to protect the operator from falling off the tractor, especially during a roll over where the driver could be crushed and killed. Only operate the tractor with the ROPS in the raised position and seat belt fastened. Tractor models not equipped with a ROPS and seat belt should have these life saving features installed by an authorized dealer. OPS-U- 0003

3.2 Tractor Lighting and SMV Emblem

If the tractor will be operated near or traveled on a public roadway it must be equipped with proper warning lighting and a Slow Moving Vehicle (SMV) emblem which are clearly visible from the rear of the unit. Most tractor’s have different settings for operating and transporting lighting. Refer to the tractor operator’s manual for using the tractor’s light switch and operating the turn signals.

OPS-B- 0017

3.3 Tractor Ballast

Before operating tractor and loader, add sufficient counterweight so a minimum of 25% of the total weight is on the rear axle. Total weight includes weight of: tractor, loader, rated load in bucket, and counterweight. Rated load is lift capacity at full height at 500mm forward of bucket pivot point. (See Standard Equipment and Specifications). When determining required counterweight bucket should be at maximum forward position (bucket pivot point at the same height as boom pivot point on mast).

2297 01/11

Operation Section 4-7

© 2011 Alamo Group Inc.

OPERATION

Page 48 Page 50
Image 49
Page 48 Page 50
Contents 2297 To the Owner/Operator/Dealer Warranty InformationTable of Contents Maintenance Section Safety Section General Safety Instructions and Practices Safety2297 01/11 Safety Section Operator Safety Instructions and Practices Equipment Operation Safety Instructions and Practices SG-36 2297 01/11 Safety Section Safety SL-33 SPU-2 Safety Transporting Safety Instructions and Practices Maintenance and Service Safety Instructions and Practices Safety Concluding Safety Instructions and Practices Storage and Parking Safety Instructions and PracticesParts Information Decal Location Model LogoInstruct ReflctrModel Name Decal DescriptionD469 2297 01/11 Safety Section Safety Safety Federal Laws and Regulations Introduction Section Introduction Introduction Introduction Before Operating this Machine Page Assembly and Connecting the Loader Section Dismounting Loader and Mounting Loader to Tractor Assembly2297 01/11 Assembly Section Proper Ballasting and Wheel Spacing Mounting Loader Dismounting LoaderAttaching Pin on Bucket Assembling Quick Attach Device Installing Quick Attach Device When Connecting an Attachment to the Loader Quick Hitch Assembly Operation Section Operation GPM Standard Equipment and SpecificationsOperator Requirements Operation Personal Protective Equipment PPE Tractor RequirementsTractor Lighting and SMV Emblem Rops and Seat BeltTractor Ballast Boarding the Tractor Getting On and Off the TractorDismounting the Tractor Starting the Tractor Pre-Operation Inspection and Service Loader Pre-Operation Inspection/Service Tractor Pre-Operation Inspection/ServiceMount Assembly Hydraulic Line Inspection Loader Boom AssemblyBucket Inspection Do not Operate an Unsafe Tractor or Implement Do not Operate an Unsafe Tractor or Front END Loader Driving the Tractor and Loader Driving the Tractor and Loader Operating the Tractor and LoaderSG-36 Operation Operation SL-33 Operation Filling the Bucket Operating the LoaderLifting the Load Carrying the Load Lowering the Bucket Dumping the BucketLoading from a Bank Operating with Float ControlOperation Peeling and Scraping Loading LOW Trucks or Spreaders from a Pile Backfilling Operation Handling Large Heavy Objects Operating Bale Spear Optional Attachment Shutting Down the Implement Loader StorageTransporting the Tractor and Implement Operation Transporting on Public Roadways Hauling the Tractor and Implement Trouble Possible Cause Possible Remedy Troubleshooting GuideProblem Possible Cause Remedy Maintenance Section Maintenance 2297 01/11 Maintenance Section Lubrication Schedule Daily Maintenance Lift and Bucket Cylinder Disassembly Cylinder ServiceStorage Lift and Bucket Cylinder ReassemblyMaintenance Proper Torque for Fasteners Maintenance Maintenance Limited Warranty Required of the Operator Required of the OwnerSOM-01/11 Printed U.S.A

2297 specifications

The Bush Hog 2297 is a robust, versatile rotary cutter that has earned a reputation for its durability and efficiency in various land maintenance tasks. Designed for both commercial and agricultural use, this mower is particularly well-suited for cutting tall grasses, weeds, and brush, making it an ideal choice for property maintenance, farming, and clearing overgrown areas.

One of the primary features of the Bush Hog 2297 is its heavy-duty construction. The cutter is built with a robust steel frame and a heavy-duty deck that provides stability and strength, allowing it to withstand the rigors of tough mowing conditions. The quality of materials used in its construction ensures a long lifespan, making it a worthwhile investment for users seeking reliability.

The 2297 is equipped with a powerful 97-inch cutting width, which enables operators to cover large areas quickly and efficiently. This feature significantly reduces mowing time compared to smaller models, making it an ideal choice for users needing to manage large properties or agricultural land. Its cutting height can be easily adjusted, allowing for a customizable mowing experience tailored to different terrains and vegetation types.

In terms of technology, the Bush Hog 2297 features a patented swing-hitch design that enables the cutter to follow the contours of the ground. This design provides an even cut, regardless of the terrain, ensuring that users achieve a professional-looking finish. Additionally, the mower incorporates heavy-duty blades that are designed for maximum cutting efficiency, capable of handling even the toughest brush and vegetation.

Safety is a priority with the Bush Hog 2297, which includes features like an integrated safety chain and a reliable gearbox that protects against stall and overload situations. Operators can work with peace of mind, knowing that the equipment has built-in safeguards to prevent accidents and prolong the life of the mower.

The Bush Hog 2297 is compatible with a range of tractors, making it a versatile addition to any farming or landscaping toolkit. With its combination of durability, powerful performance, and innovative design, the Bush Hog 2297 stands out as a top choice for those seeking a high-quality rotary cutter that delivers consistent results in diverse mowing conditions. Whether you’re managing a farm, maintaining a large property, or clearing brush, the Bush Hog 2297 is the tool you can rely on to get the job done effectively.
Top Page Image Contents