Bush Hog 2297 manual Operating the Tractor and Loader, Driving the Tractor and Loader

Page 60
(SL-17)
(SL-07)

OPERATION

OPERATION

Use extra care when turning or stopping. Allow for increased length and weight of added loader. The loader adds five to six feet of length in front of the tractor and significant weight. Allow extra distance when stopping or turning. Do not allow loader or attachment to contact solid objects.

Safe tractor transport requires the operator possess a thorough knowledge of the model being operated and precautions to take while driving with an attached implement. Ensure the tractor has the capacity to handle the weight of the implement and the tractor operating controls are set for safe transport. To ensure safety while driving the tractor with an attached implement, review the following. OPS-L- 0028

7.1 Driving the Tractor and Loader

Start off driving at a slow speed and gradually increase your speed while maintaining complete control of the tractor and loader. Moving slowly at first will also prevent the tractor from rearing up and loss of steering control. The tractor should never be operated at speeds that cannot be safely handled or which will prevent the operator from stopping quickly during an emergency. If the power steering or engine ceases operating, stop the tractor immediately as the tractor will be difficult to control.

Perform turns with the tractor and loader at slow speeds to determine how the tractor with an attached implements handles a turn. Determine the safe speed to maintain proper control of the tractor when making turns. When turning with an implement, the overall working length of the unit is increased. Allow additional clearance for the loader when turning.

To avoid overturns, drive the tractor with care and at safe speeds, especially when operating over rough ground, crossing ditches or slopes, and turning corners. Tractor rear wheel spacing should be increased when operating on inclines or rough ground to reduce the possibility of tipping.

Use extreme caution when operating on steep slopes. Keep the tractor in a low gear when going downhill. DO NOT coast or free-wheel downhill. OPS-L-0030

8. Operating the Tractor and Loader

Do not attempt to lift loads in excess of loader capacity.

Operating loader on a hillside is dangerous. Extreme care is recommended. Keep bucket as low as possible.

Use extreme care when piling material above 6 feet high. Material could shift and fall onto the operator or bystanders. The material could crush or suffocate the operator or bystander resulting in serious injury or death.

2297 01/11

Operation Section 4-18

© 2011 Alamo Group Inc.

Page 59 Page 61
Image 60
Page 59 Page 61
Contents 2297 Warranty Information To the Owner/Operator/DealerTable of Contents Maintenance Section Safety Section Safety General Safety Instructions and Practices2297 01/11 Safety Section Operator Safety Instructions and Practices Equipment Operation Safety Instructions and Practices SG-36 2297 01/11 Safety Section Safety SL-33 SPU-2 Safety Transporting Safety Instructions and Practices Maintenance and Service Safety Instructions and Practices Safety Storage and Parking Safety Instructions and Practices Concluding Safety Instructions and PracticesParts Information Decal Location Logo ModelInstruct ReflctrDecal Description Model NameD469 2297 01/11 Safety Section Safety Safety Federal Laws and Regulations Introduction Section Introduction Introduction Introduction Before Operating this Machine Page Assembly and Connecting the Loader Section Assembly Dismounting Loader and Mounting Loader to Tractor2297 01/11 Assembly Section Proper Ballasting and Wheel Spacing Dismounting Loader Mounting LoaderAttaching Pin on Bucket Assembling Quick Attach Device Installing Quick Attach Device When Connecting an Attachment to the Loader Quick Hitch Assembly Operation Section Operation Standard Equipment and Specifications GPMOperator Requirements Operation Tractor Requirements Personal Protective Equipment PPERops and Seat Belt Tractor Lighting and SMV EmblemTractor Ballast Getting On and Off the Tractor Boarding the TractorDismounting the Tractor Starting the Tractor Pre-Operation Inspection and Service Tractor Pre-Operation Inspection/Service Loader Pre-Operation Inspection/ServiceMount Assembly Loader Boom Assembly Hydraulic Line InspectionBucket Inspection Do not Operate an Unsafe Tractor or Implement Do not Operate an Unsafe Tractor or Front END Loader Driving the Tractor and Loader Operating the Tractor and Loader Driving the Tractor and LoaderSG-36 Operation Operation SL-33 Operation Operating the Loader Filling the BucketLifting the Load Carrying the Load Dumping the Bucket Lowering the BucketOperating with Float Control Loading from a BankOperation Peeling and Scraping Loading LOW Trucks or Spreaders from a Pile Backfilling Operation Handling Large Heavy Objects Operating Bale Spear Optional Attachment Loader Storage Shutting Down the ImplementTransporting the Tractor and Implement Operation Transporting on Public Roadways Hauling the Tractor and Implement Troubleshooting Guide Trouble Possible Cause Possible RemedyProblem Possible Cause Remedy Maintenance Section Maintenance 2297 01/11 Maintenance Section Lubrication Schedule Daily Maintenance Cylinder Service Lift and Bucket Cylinder DisassemblyLift and Bucket Cylinder Reassembly StorageMaintenance Proper Torque for Fasteners Maintenance Maintenance Limited Warranty Required of the Owner Required of the OperatorSOM-01/11 Printed U.S.A

2297 specifications

The Bush Hog 2297 is a robust, versatile rotary cutter that has earned a reputation for its durability and efficiency in various land maintenance tasks. Designed for both commercial and agricultural use, this mower is particularly well-suited for cutting tall grasses, weeds, and brush, making it an ideal choice for property maintenance, farming, and clearing overgrown areas.

One of the primary features of the Bush Hog 2297 is its heavy-duty construction. The cutter is built with a robust steel frame and a heavy-duty deck that provides stability and strength, allowing it to withstand the rigors of tough mowing conditions. The quality of materials used in its construction ensures a long lifespan, making it a worthwhile investment for users seeking reliability.

The 2297 is equipped with a powerful 97-inch cutting width, which enables operators to cover large areas quickly and efficiently. This feature significantly reduces mowing time compared to smaller models, making it an ideal choice for users needing to manage large properties or agricultural land. Its cutting height can be easily adjusted, allowing for a customizable mowing experience tailored to different terrains and vegetation types.

In terms of technology, the Bush Hog 2297 features a patented swing-hitch design that enables the cutter to follow the contours of the ground. This design provides an even cut, regardless of the terrain, ensuring that users achieve a professional-looking finish. Additionally, the mower incorporates heavy-duty blades that are designed for maximum cutting efficiency, capable of handling even the toughest brush and vegetation.

Safety is a priority with the Bush Hog 2297, which includes features like an integrated safety chain and a reliable gearbox that protects against stall and overload situations. Operators can work with peace of mind, knowing that the equipment has built-in safeguards to prevent accidents and prolong the life of the mower.

The Bush Hog 2297 is compatible with a range of tractors, making it a versatile addition to any farming or landscaping toolkit. With its combination of durability, powerful performance, and innovative design, the Bush Hog 2297 stands out as a top choice for those seeking a high-quality rotary cutter that delivers consistent results in diverse mowing conditions. Whether you’re managing a farm, maintaining a large property, or clearing brush, the Bush Hog 2297 is the tool you can rely on to get the job done effectively.
Top Page Image Contents