Reparation instructions
5
1 |
2
Lift off the drive belt (1). Now pull out the pin (2). Make sure not to trap your hand.
6
If the cylindrical bolt, which is now holding the mowing deck is removed, the mowing deck can be lifted off.
To leave the service position
To leave the service position, reverse the procedures set out in “Placing in the service posi- tion”. Make sure that the “lug” (3) on the mowing deck enters the clamp correctly on the underside of the machine, see diagram.
Pull the frame forwards and replace the pin.
7
Grip the front edge of the deck, and pull out and lift it up to the service position.
English – 51