Briggs & Stratton RIDER 11 BIO, RIDER 16 Dealer service Hours service, At least once a season

Page 10

Delivery and dealer service

Dealer service

25 hours service

1.Change the engine oil on the side-valve engine (With high load and temperature on the overhead-valve engine).

2.Clean/replace the airfilter’s pre-filter or oil-foam element, if fitted. (More frequent intervals in dusty operating conditions.)

3.Clean/replace the air filter’s filter cartridge (25 hours, 100 hours if pre-filter is fitted).

(More frequent intervals in dusty operating conditions.)

4.Check the tyre pressures.

5.Check the mower deck (visual inspection)

6.Lubricate the belt tensioner.

7.Lubricate joints and axles.

8.Adjust the brake (Rider 11).

9.Check the V-belts.

10.Clean the engine’s cooling air intake.

11.Check/clean the hydrostatic transmission gear’s cooling fins.

50 hours service

1.Carry out 25 hours service as above.

2.Change engine oil.

3.Check the oil level in the transmission. (Rider 13, 16).

4.Check/adjust the parking brake. (Rider 13, 16).

5.Check/adjust the throttle wire.

6.Clean the cooling fins on the engine and transmission.

7.Check/adjust the settings on the mowing deck.

8.Inspect the flame guard/spark arrester. (extra equipment)

100 hours service

1.Carry out 25 hours service as above.

2.Carry out 50 hours service as above.

3.Replace the pre-filter and filter cartridge in the air filter.

4.Replace the fuel filter in the pipe.

5.Clean/replace the spark plug.

300 hours service

1.Inspect the machine. Reach agreement with the customer about which additional work should be carried out.

2.Carry out 25 hours service as above.

3.Carry out 50 hours service as above.

4.Carry out 100 hours service as above.

5.Check the valve clearance on the engine.

At least once a season

1.Change the engine oil (25/50 hours).

2.Replace the pre-filter in the air filter.

3.Replace the filter cartridge in the air filter.

4.Check/adjust the settings on the mowing deck.

5.Adjust the parking brake.

6.Inspect the flame guard/spark arrester (extra equipment).

7.Clean/replace the spark plug.

8.Replace the fuel filter in the pipe.

9.Clean the cooling fins on the engine and trans- mission.

10.Check the valve clearance on the engine.

11.300 hours service should be carried out by an authorised service workshop.

8 – English

Image 10

Contents Rider 11, Rider Rider 11 Bio, Rider 13 Bio, Rider Svenska Rider 11, Rider Rider 11 Bio, Rider 13 Bio Contents Workshop manualGeneral instructions Safety regulationsSpecial instructions Special tools Tightening moments Technical dataPlay Mowing deck Rear ejector Side ejector Bio Mowing deck BioClip CombiControl points Pre-delivery service Delivery and dealer serviceAfter first 5 hours Dealer service Hours service At least once a seasonMaintenance Maintenance scheduleMaintenance interval HoursPackaging and unpacking Delivery measuresTo our dealer Parts enclosed in packaging, RiderBattery Measures for contact with acidTow plate Steering wheelCheck the oil level in the engine Checking the oil level in the transmission WheelsTest running Administration Speed regulatorDesign and function GeneralSerial number Engine Steering Driving Mowing deckCombi 1030 mm Combi 1120 mm Mowing height manoeuvring Removing engine Reparation instructionsHold the bolts so that the poles are not put under strain Reparation instructions Replacing engine Reparation instructions Fuel tank Removal FittingChecking and adjusting steering wires Changing the oilReplacing steering wires Removal/installation of steering axleRemoval/installation of wire wheel Badly adjusted brake can lead to reduced braking capacity Checking and adjusting brake wireRider 13 and Rider Checking and adjusting gear control Rider Checking and adjusting freewheel clutch RiderChecking and adjusting throttle control Replacing articulated steering bearingReparation instructions Replacing bushings Removal of swing axleRider 13 Installation of swing axle Removal/installation of gear box Sealing collar replacement input axle Replacing hydrostatic transmission axle sealing collarsSealing collar replacement outgoing axles Replacing hydrostatic transmission wire Removal of hydrostatic transmission wireReparation instructions Refitting hydrostatic transmission wire ~80 Adjustment of transmission neutral position Bleeding the hydrostatic transmission oil systemTransmission maintenance Oil changeChanging oil Rider 13 and Rider Removing the beltRider 11, Rider 13 H, Rider 16 H och Rider 14 Pro Checking and adjusting mower deck parallelism Checking and adjusting mower deck ground pressureAdjusting Rider 11 and Rider 13 H Adjusting Rider 11 Bio and Rider 13 Bio Adjusting cutting height area Adjusting cutting heightRemoving the cutting unit To leave the service position Dismantling the cutting unit Rear and side ejectorsBelt replacement on BioClip 103 and Combi Replacing the cutting unit’s beltsBelt replacement on BioClip Replacing the break-pin BioClip 90, 103 and Combi Removal of blades with bearingsImportant Information When working with the blades, use protective gloves Grinding and balancing of bladesCircuit diagram Rider Electrical systemCircuit diagram Rider 13 and Rider 13 Bio Pos Utf Inspecting the safety system Microswitch Seat Microswitch Neutral Position Microswitch Mowing DeckIgnition and Starter Lock Main fuse Engine will not Start Engine Starts but does not RUN Satisfactorily Page Page Page Svenska Svenska Svenska ´z+H.T¶6w¨ Svenska ´z+H.T¶6w¨ 2002W51 114 01Also See