Regular Maintenance
LUBRICATION
Lubricate the unit at the locations shown in Figure 20 through 24.
Grease: | Oil: |
Use grease fittings when present. Disassemble parts to apply grease to moving parts when grease fittings are not installed.
Not all greases are compatible. Ferris Red Grease (P/N 5022285) is recommended,
Generally, all moving metal parts should be oiled where contact is made with other parts. Keep oil and grease off belts and pulleys. Remember to wipe fittings and surfaces clean both before and after lubrication.
Maintenance
Figure 20. Deck Lift Linkage Pivots
Figure 21. Deck Lubrication
BEARINGS
ANUALLY
Figure 23. Control Handle Pivots & Seat Pivots
Figure 24. Gearbox Drive Idler Pivot
Figure 22. Front Caster & Wheel |
|
32 | www.ferrisindustries.com |