Briggs & Stratton 5900692, 5900664 manual Deck Leveling Adjustment

Page 10

S200X 25HP & 27HP - 61” Mower Deck

 

Deck Leveling

 

Adjustment

 

NOTE: Before adjusting the deck level, the deck lift rod

 

timing must be checked and/or adjusted.

 

1. Park machine on a flat, level surface. Disengage the

 

PTO, stop the engine and engage the parking brake.

 

Rear tires must be inflated to 15 psi (1,03 bar); front

 

tires to 25 psi (1,72 bar).

 

2. Lock the deck lift pedal in the 5” (12,7cm) position.

 

Place the deck height adjustment pin in the 4"

 

position and lower the deck lift pedal until the arm

Figure 18. 2 x 4 Locations

contacts the pin.

3. Place the 2 x 4 blocks under each corner of the

 

mower deck with the 3-1/2” sides being vertical.

61” Models

Place a 1/4” (0,64cm) thick spacer on top of the rear

2 x 4’s. See Figure 18.

 

6. For 61” Deck Models: Adjust the front eyebolts until

 

the chains are tight and the deck is still resting on the

 

2 x 4’s. Tighten the jam nuts. See Figure 19.

 

For 72” Deck Models: Loosen the nuts and allow

 

the front of the deck to rest on the 2 x 4’s. Slide the

 

chains down in the slots until the chains are tight and

 

tighten the nuts. See Figure 19.

 

7. Loosen the nuts and allow the rear of the deck to rest

 

on the 2 x 4’s and 1/4” spacers. Slide the chains

 

down in the slots until the chains are tight and tighten

 

the nuts. See Figure 19.

 

8. Remove all the 2 x 4’s and spacers from under the

72” Models

mower deck.

 

9. For your safety, DO NOT handle mower blades

 

with bare hands. Position the outside mower blades

 

so that they face front-to-back (Figure 20).

Adjust

10. Measure from the front tip of the blade from the

Here

cutting edge to the ground. Measure from the rear

 

tip of the blade from the cutting edge to the ground.

 

Repeat this process for the other side of the

 

machine. The front measurements should be 4” (10,2

Adjust

cm), the back measurements should be 4-1/4” (10,8

cm). If the measurements are greater than 1/8” (3,17

Here

mm) of what they should be adjust the deck height

Figure 19. Hanger Chain Adjustment

until they are correct.

 

Figure 20. Checking The Blade Height Measurement

TP 300-7333-02-M2-SP

10

7/2007

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Dealer Setup Adjustment Instructions Quick Setup List S200X 25HP & 27HP 61 Mower DeckUncrating Battery InstallationConnect Battery Hydraulic Release ValveMotion Control Handle Assembly Tractor AssemblySeat Assembly Roll Bar Installation Install the Roll BarCheck the Engine Oil Level Check the Hydraulic Oil Level Check Fluid LevelsCheck Tire Pressures Tire PressureCheck Torque Mower Blades Check the Mower AssemblyInstall Deck Pusher Bars 72 Models Bolts to 70 ft.lbs N.mInstall the Mower Deck 72 Models Deck Hanger Chain InstallationCheck Deck Rod Timing Check Lift Rod TimingDeck Leveling Adjustment Check Deck Drive Belt Mower PTO Belt 61 Models Idler Arm Stationary Idler PulleyOil LubricationGrease Lubricating the Front CastersTo add fuel Adding FuelStarting The Engine Adding FuelPerform Safety Checks Functional TestsSeat Adjustment Seat Adjustment Suspension SeatMotion Control Handle Adjustment Return-To-Neutral Neutral Adjustment Parking Brake Adjustment Parking Brake Adjustment Brake Spring Adjustment Nut

5900664, 5900692 specifications

Briggs & Stratton has long been a trusted name in the engine industry, renowned for its innovation and performance. Among its wide array of products, the Briggs & Stratton 5900692 and 5900664 models stand out, featuring a range of characteristics that cater to the needs of both professionals and enthusiasts alike.

The Briggs & Stratton 5900692, also known as a fuel tank assembly and cap, is designed to provide a reliable and effective solution for fuel storage in lawn and garden equipment. One of its main features is its durable construction, which ensures longevity and resistance to environmental factors. Made from high-quality materials, it is impervious to the types of wear and tear commonly encountered in outdoor usage, ensuring that it remains functional over time.

On the other hand, the Briggs & Stratton 5900664 is a carburetor specifically engineered for certain small engines. An impressive feature of this model is its efficient fuel delivery system. The carburetor plays a crucial role in maintaining optimal engine performance by precisely mixing air and fuel in the correct proportions. This leads to improved fuel efficiency, lower emissions, and enhanced power output, making it an excellent addition to any compatible engine setup.

Both models embody advanced engineering technologies that highlight Briggs & Stratton's commitment to quality and innovation. The fuel tank assembly employs a secure locking mechanism that prevents fuel leakage and enhances safety during operation. Meanwhile, the carburetor features adjustable settings, providing users the ability to fine-tune their engines for specific applications, whether it be for mowing, tilling, or other tasks requiring dependable performance.

In addition to their specific functions, both the 5900692 and 5900664 are designed for straightforward installation and compatibility with a range of equipment, minimizing downtime and allowing users to get back to work quickly. Their reliability under heavy loads and in various environmental conditions further emphasizes the reputation of Briggs & Stratton as a leader in small engine technology.

Ultimately, the Briggs & Stratton 5900692 and 5900664 models exemplify the company's dedication to producing high-performance, durable solutions for lawn and garden care. Whether you require an effective fuel storage solution or a precise carburetion system, these models deliver the quality and functionality that professionals and DIYers expect from Briggs & Stratton.
Top Page Image Contents