Briggs & Stratton 5900692, 5900664 manual Check Fluid Levels, Check Tire Pressures

Page 6

S200X 25HP & 27HP - 61” Mower Deck

Check

Fluid Levels

Check the Engine Oil Level

1.Use the dipstick (A, Figure 8) to check the engine oil level. If necessary add engine oil. Check the engine manufacturer’s owner’s manual for the oil recommendations.

Check the Hydraulic Oil Level

NOTE: Do not open the hydraulic reservoir unless oil is being added.

1.Before removing the reservoir cap, make sure the area around the reservoir cap and fill neck of the reservoir is free of dust, dirt, or other debris.

2.Unscrew the reservoir cap (B, Figure 9).

3.Look down the filler neck of the hydraulic oil reservoir

(A) and observe the oil level. When cold, the oil level should be approximately 4” (10 cm) below top of the filler neck.

4.If necessary, add SAE 20W-50 motor oil.

5.Reinstall the reservoir cap.

A

Figure 8. Pre-start Checks

A. Crankcase Oil Fill

B

A

Figure 9. Checking the Hydraulic Oil Level

A.Hydraulic Oil Reservoir

B.Reservoir Cap

Check Tire Pressures

Tire pressure should be checked periodically, and maintained at the levels shown in the chart. Note that these pressures may differ slightly from the “Max Inflation” stamped on the side-wall of the tires. The pressures shown provide proper traction, improve the cut quality, and extend the tire life.

Tire

Pressure

Front

25 psi (1,72 bar)

 

 

Rear

15 psi (1,03 bar)

Figure 10. Checking Tire Pressure

TP 300-7333-02-M2-SP

6

7/2007

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Dealer Setup Adjustment Instructions Quick Setup List S200X 25HP & 27HP 61 Mower DeckUncrating Battery InstallationConnect Battery Hydraulic Release ValveTractor Assembly Motion Control Handle AssemblySeat Assembly Roll Bar Installation Install the Roll BarCheck the Engine Oil Level Check the Hydraulic Oil Level Check Fluid LevelsCheck Tire Pressures Tire PressureCheck Torque Mower Blades Check the Mower AssemblyInstall Deck Pusher Bars 72 Models Bolts to 70 ft.lbs N.mInstall the Mower Deck 72 Models Deck Hanger Chain InstallationCheck Deck Rod Timing Check Lift Rod TimingDeck Leveling Adjustment Check Deck Drive Belt Mower PTO Belt 61 Models Idler Arm Stationary Idler PulleyOil LubricationGrease Lubricating the Front CastersTo add fuel Adding FuelStarting The Engine Adding FuelPerform Safety Checks Functional TestsSeat Adjustment Seat Adjustment Suspension SeatMotion Control Handle Adjustment Return-To-Neutral Neutral Adjustment Parking Brake Adjustment Parking Brake Adjustment Brake Spring Adjustment Nut

5900664, 5900692 specifications

Briggs & Stratton has long been a trusted name in the engine industry, renowned for its innovation and performance. Among its wide array of products, the Briggs & Stratton 5900692 and 5900664 models stand out, featuring a range of characteristics that cater to the needs of both professionals and enthusiasts alike.

The Briggs & Stratton 5900692, also known as a fuel tank assembly and cap, is designed to provide a reliable and effective solution for fuel storage in lawn and garden equipment. One of its main features is its durable construction, which ensures longevity and resistance to environmental factors. Made from high-quality materials, it is impervious to the types of wear and tear commonly encountered in outdoor usage, ensuring that it remains functional over time.

On the other hand, the Briggs & Stratton 5900664 is a carburetor specifically engineered for certain small engines. An impressive feature of this model is its efficient fuel delivery system. The carburetor plays a crucial role in maintaining optimal engine performance by precisely mixing air and fuel in the correct proportions. This leads to improved fuel efficiency, lower emissions, and enhanced power output, making it an excellent addition to any compatible engine setup.

Both models embody advanced engineering technologies that highlight Briggs & Stratton's commitment to quality and innovation. The fuel tank assembly employs a secure locking mechanism that prevents fuel leakage and enhances safety during operation. Meanwhile, the carburetor features adjustable settings, providing users the ability to fine-tune their engines for specific applications, whether it be for mowing, tilling, or other tasks requiring dependable performance.

In addition to their specific functions, both the 5900692 and 5900664 are designed for straightforward installation and compatibility with a range of equipment, minimizing downtime and allowing users to get back to work quickly. Their reliability under heavy loads and in various environmental conditions further emphasizes the reputation of Briggs & Stratton as a leader in small engine technology.

Ultimately, the Briggs & Stratton 5900692 and 5900664 models exemplify the company's dedication to producing high-performance, durable solutions for lawn and garden care. Whether you require an effective fuel storage solution or a precise carburetion system, these models deliver the quality and functionality that professionals and DIYers expect from Briggs & Stratton.
Top Page Image Contents