Briggs & Stratton 5900664, 5900692 manual Check Deck Rod Timing, Check Lift Rod Timing

Page 9

 

S200X 25HP & 27HP - 61” Mower Deck

Check Deck Rod Timing

 

1. Park machine on a flat, level surface. Disengage the

 

PTO, stop the engine and engage the parking brake.

 

Rear tires must be inflated to 15 psi (1,03 bar); front

 

tires to 25 psi (1,72 bar).

 

2. To check the lift rod timing, measure and record the

 

distance between the lift pivots and the rod pivots.

 

Repeat for the other side of the machine. See Figure

 

16.

Figure 16. Check Lift Rod Timing

 

3.If the measurements for the rods are equal, no further adjustment is required. If the measurements

are NOT equal (greater than 1/8” (3,17mm) difference), adjustment is required, continue with Step 5.

4. Lock the deck lift pedal in the 5” (12,7cm) position. Remove the cutting height adjustment pin and lower the mower deck.

5.To ensure that the deck is in the lowest position, push the pedal by hand towards the rear of the machine and install the height adjustment pin in the 3” (7.6cm) position to hold in place.

6. Block up the mower deck until all hanger chains are

Figure 17. Adjust Lift Rod Timing

slack. Refer to Figure 18.

 

7.See Figure 17. To adjust the lift rod, loosen the jam nut on the front clevis then remove the 1/2” clevis pin fastening the clevis the the lift pivot arm. Turn the clevis clockwise to shorten the distance between the rod pivots or counterclockwise to lengthen the distance between the rod pivots. Reinstall the clevis on the lift pivot arm and secure with the 1/2” clevis pin previously removed. Tighten the jam nut against the clevis.

8.Remove the blocks from under the mower deck.

9.Remove the the cutting height adjustment pin from in front of the deck lift pedal arm. Lift the mower deck and reinstall the adjustment pin in the desired mowing height.

7/2007

9

TP 300-7333-02-M2-SP

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Dealer Setup Adjustment Instructions S200X 25HP & 27HP 61 Mower Deck Quick Setup ListConnect Battery Battery InstallationUncrating Hydraulic Release ValveTractor Assembly Motion Control Handle AssemblySeat Assembly Install the Roll Bar Roll Bar InstallationCheck Tire Pressures Check Fluid LevelsCheck the Engine Oil Level Check the Hydraulic Oil Level Tire PressureInstall Deck Pusher Bars 72 Models Check the Mower AssemblyCheck Torque Mower Blades Bolts to 70 ft.lbs N.mDeck Hanger Chain Installation Install the Mower Deck 72 ModelsCheck Lift Rod Timing Check Deck Rod TimingDeck Leveling Adjustment Mower PTO Belt 61 Models Idler Arm Stationary Idler Pulley Check Deck Drive BeltGrease LubricationOil Lubricating the Front CastersStarting The Engine Adding FuelTo add fuel Adding FuelFunctional Tests Perform Safety ChecksSeat Adjustment Suspension Seat Seat AdjustmentMotion Control Handle Adjustment Return-To-Neutral Neutral Adjustment Parking Brake Adjustment Brake Spring Adjustment Nut Parking Brake Adjustment

5900664, 5900692 specifications

Briggs & Stratton has long been a trusted name in the engine industry, renowned for its innovation and performance. Among its wide array of products, the Briggs & Stratton 5900692 and 5900664 models stand out, featuring a range of characteristics that cater to the needs of both professionals and enthusiasts alike.

The Briggs & Stratton 5900692, also known as a fuel tank assembly and cap, is designed to provide a reliable and effective solution for fuel storage in lawn and garden equipment. One of its main features is its durable construction, which ensures longevity and resistance to environmental factors. Made from high-quality materials, it is impervious to the types of wear and tear commonly encountered in outdoor usage, ensuring that it remains functional over time.

On the other hand, the Briggs & Stratton 5900664 is a carburetor specifically engineered for certain small engines. An impressive feature of this model is its efficient fuel delivery system. The carburetor plays a crucial role in maintaining optimal engine performance by precisely mixing air and fuel in the correct proportions. This leads to improved fuel efficiency, lower emissions, and enhanced power output, making it an excellent addition to any compatible engine setup.

Both models embody advanced engineering technologies that highlight Briggs & Stratton's commitment to quality and innovation. The fuel tank assembly employs a secure locking mechanism that prevents fuel leakage and enhances safety during operation. Meanwhile, the carburetor features adjustable settings, providing users the ability to fine-tune their engines for specific applications, whether it be for mowing, tilling, or other tasks requiring dependable performance.

In addition to their specific functions, both the 5900692 and 5900664 are designed for straightforward installation and compatibility with a range of equipment, minimizing downtime and allowing users to get back to work quickly. Their reliability under heavy loads and in various environmental conditions further emphasizes the reputation of Briggs & Stratton as a leader in small engine technology.

Ultimately, the Briggs & Stratton 5900692 and 5900664 models exemplify the company's dedication to producing high-performance, durable solutions for lawn and garden care. Whether you require an effective fuel storage solution or a precise carburetion system, these models deliver the quality and functionality that professionals and DIYers expect from Briggs & Stratton.
Top Page Image Contents