Briggs & Stratton 5900664 Uncrating, Battery Installation, Connect Battery, Left-hand pump shown

Page 3

 

 

S200X 25HP & 27HP - 61” Mower Deck

 

Uncrating

 

1.

Using a reciprocating utility saw or equivalent, cut

A

 

crate away from bottom skid. Remove crate. Remove

 

 

shrink-wrap plastic.

 

2.

Cut nylon banding from front of the frame and rear

 

 

rear bumper.

 

 

IMPORTANT NOTE

 

 

When cutting crate from bottom skid,

 

 

use caution around tractor tires and

 

 

mower rollers.

Figure 1. Hydraulic System By-Pass

 

 

3.

Open the hydraulic release valves. To open the

A. Hydraulic Release Valve

(left-hand pump shown)

 

release valves, turn the release valve, which is

 

 

located on front of the pump, counter-clockwise 2 full

 

 

turns MAX. See Figure 1 for valve location.

A

4.

Push down on the parking brake lever (A, Figure 2)

 

 

to release the parking brake.

 

5.

Be sure there are no nails or sharp objects on the

 

 

bottom skid to puncture the tractor’s tires. Roll the

 

 

tractor forward off the bottom skid.

 

6.

After moving the tractor, re-engage the pumps (drive

 

 

position) by turning the release valves clockwise and

 

 

tighten to 80-120 in/lbs (9-13.5 N.m.).

 

Battery Installation

WARNING

BATTERY SAFETY RULES

•Battery acid causes severe burns. Avoid contact with skin.

•Wear eye protection while handling the battery.

•To avoid an explosion, keep flames and sparks away from the battery, especially while charging.

•When installing the battery cables, CONNECT THE POSITIVE (+) CABLE FIRST and the negative (-) cable last. If not done in this order, the positive terminal can be shorted to the frame by a tool.

Connect Battery

1.Connect the red positive battery cable (B, Figure 3) to the positive battery post.

2.Connect the black negative battery cable (A) to the negative battery post.

Figure 2. Disengaging the Parking Brake (lever shown in disengaged position)

A. Parking Brake Lever

A

B

Figure 3. Connect the Battery

A.Positive (+) Cable & Terminal

B.Negative (-) Cable & Terminal

7/2007

3

TP 300-7333-02-M2-SP

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Dealer Setup Adjustment Instructions S200X 25HP & 27HP 61 Mower Deck Quick Setup ListHydraulic Release Valve Battery InstallationConnect Battery UncratingTractor Assembly Motion Control Handle AssemblySeat Assembly Install the Roll Bar Roll Bar InstallationTire Pressure Check Fluid LevelsCheck Tire Pressures Check the Engine Oil Level Check the Hydraulic Oil LevelBolts to 70 ft.lbs N.m Check the Mower AssemblyInstall Deck Pusher Bars 72 Models Check Torque Mower BladesDeck Hanger Chain Installation Install the Mower Deck 72 ModelsCheck Lift Rod Timing Check Deck Rod TimingDeck Leveling Adjustment Mower PTO Belt 61 Models Idler Arm Stationary Idler Pulley Check Deck Drive BeltLubricating the Front Casters LubricationGrease OilAdding Fuel Adding FuelStarting The Engine To add fuelFunctional Tests Perform Safety ChecksSeat Adjustment Suspension Seat Seat AdjustmentMotion Control Handle Adjustment Return-To-Neutral Neutral Adjustment Parking Brake Adjustment Brake Spring Adjustment Nut Parking Brake Adjustment

5900664, 5900692 specifications

Briggs & Stratton has long been a trusted name in the engine industry, renowned for its innovation and performance. Among its wide array of products, the Briggs & Stratton 5900692 and 5900664 models stand out, featuring a range of characteristics that cater to the needs of both professionals and enthusiasts alike.

The Briggs & Stratton 5900692, also known as a fuel tank assembly and cap, is designed to provide a reliable and effective solution for fuel storage in lawn and garden equipment. One of its main features is its durable construction, which ensures longevity and resistance to environmental factors. Made from high-quality materials, it is impervious to the types of wear and tear commonly encountered in outdoor usage, ensuring that it remains functional over time.

On the other hand, the Briggs & Stratton 5900664 is a carburetor specifically engineered for certain small engines. An impressive feature of this model is its efficient fuel delivery system. The carburetor plays a crucial role in maintaining optimal engine performance by precisely mixing air and fuel in the correct proportions. This leads to improved fuel efficiency, lower emissions, and enhanced power output, making it an excellent addition to any compatible engine setup.

Both models embody advanced engineering technologies that highlight Briggs & Stratton's commitment to quality and innovation. The fuel tank assembly employs a secure locking mechanism that prevents fuel leakage and enhances safety during operation. Meanwhile, the carburetor features adjustable settings, providing users the ability to fine-tune their engines for specific applications, whether it be for mowing, tilling, or other tasks requiring dependable performance.

In addition to their specific functions, both the 5900692 and 5900664 are designed for straightforward installation and compatibility with a range of equipment, minimizing downtime and allowing users to get back to work quickly. Their reliability under heavy loads and in various environmental conditions further emphasizes the reputation of Briggs & Stratton as a leader in small engine technology.

Ultimately, the Briggs & Stratton 5900692 and 5900664 models exemplify the company's dedication to producing high-performance, durable solutions for lawn and garden care. Whether you require an effective fuel storage solution or a precise carburetion system, these models deliver the quality and functionality that professionals and DIYers expect from Briggs & Stratton.
Top Page Image Contents