Briggs & Stratton 5900664, 5900692 manual Adding Fuel, Starting The Engine, To add fuel, Fuel Cap

Page 13

 

S200X 25HP & 27HP - 61” Mower Deck

 

Adding Fuel

A

 

 

To add fuel:

 

1.

Remove the fuel cap (see A, Figure 29).

 

2.

Fill the tank to about 1-1/2” (3,81 cm) of the bottom of

 

 

the filler neck. This will allow for fuel expansion.

 

NOTE: Do not overfill. Refer to your engine manual for

 

specific fuel recommendations.

 

3.

Install and hand tighten the fuel cap.

Adding Fuel

 

Figure 29.

 

A. Fuel Cap

Starting The Engine

1.While sitting in the operator’s seat, engage the parking brake and make sure the PTO switch is disengaged and the motion control handles are locked in the NEUTRAL position.

2.Set the engine throttle control to FULL throttle position. Then fully close the choke by pulling the knob OUT fully.

3.Insert the key into the ignition switch and turn it to

START.

4.After the engine starts, gradually open the choke (push knob down fully). Reduce to half throttle speed and allow to warm up.

Warm up the engine by running it for at least a minute before engaging the PTO switch or driving the rider.

5.After warming the engine, ALWAYS operate the unit at FULL THROTTLE when mowing.

7/2007

13

TP 300-7333-02-M2-SP

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Dealer Setup Adjustment Instructions S200X 25HP & 27HP 61 Mower Deck Quick Setup ListConnect Battery Battery InstallationUncrating Hydraulic Release ValveMotion Control Handle Assembly Tractor AssemblySeat Assembly Install the Roll Bar Roll Bar InstallationCheck Tire Pressures Check Fluid LevelsCheck the Engine Oil Level Check the Hydraulic Oil Level Tire PressureInstall Deck Pusher Bars 72 Models Check the Mower AssemblyCheck Torque Mower Blades Bolts to 70 ft.lbs N.mDeck Hanger Chain Installation Install the Mower Deck 72 ModelsCheck Lift Rod Timing Check Deck Rod TimingDeck Leveling Adjustment Mower PTO Belt 61 Models Idler Arm Stationary Idler Pulley Check Deck Drive BeltGrease LubricationOil Lubricating the Front CastersStarting The Engine Adding FuelTo add fuel Adding FuelFunctional Tests Perform Safety ChecksSeat Adjustment Suspension Seat Seat AdjustmentMotion Control Handle Adjustment Return-To-Neutral Neutral Adjustment Parking Brake Adjustment Brake Spring Adjustment Nut Parking Brake Adjustment

5900664, 5900692 specifications

Briggs & Stratton has long been a trusted name in the engine industry, renowned for its innovation and performance. Among its wide array of products, the Briggs & Stratton 5900692 and 5900664 models stand out, featuring a range of characteristics that cater to the needs of both professionals and enthusiasts alike.

The Briggs & Stratton 5900692, also known as a fuel tank assembly and cap, is designed to provide a reliable and effective solution for fuel storage in lawn and garden equipment. One of its main features is its durable construction, which ensures longevity and resistance to environmental factors. Made from high-quality materials, it is impervious to the types of wear and tear commonly encountered in outdoor usage, ensuring that it remains functional over time.

On the other hand, the Briggs & Stratton 5900664 is a carburetor specifically engineered for certain small engines. An impressive feature of this model is its efficient fuel delivery system. The carburetor plays a crucial role in maintaining optimal engine performance by precisely mixing air and fuel in the correct proportions. This leads to improved fuel efficiency, lower emissions, and enhanced power output, making it an excellent addition to any compatible engine setup.

Both models embody advanced engineering technologies that highlight Briggs & Stratton's commitment to quality and innovation. The fuel tank assembly employs a secure locking mechanism that prevents fuel leakage and enhances safety during operation. Meanwhile, the carburetor features adjustable settings, providing users the ability to fine-tune their engines for specific applications, whether it be for mowing, tilling, or other tasks requiring dependable performance.

In addition to their specific functions, both the 5900692 and 5900664 are designed for straightforward installation and compatibility with a range of equipment, minimizing downtime and allowing users to get back to work quickly. Their reliability under heavy loads and in various environmental conditions further emphasizes the reputation of Briggs & Stratton as a leader in small engine technology.

Ultimately, the Briggs & Stratton 5900692 and 5900664 models exemplify the company's dedication to producing high-performance, durable solutions for lawn and garden care. Whether you require an effective fuel storage solution or a precise carburetion system, these models deliver the quality and functionality that professionals and DIYers expect from Briggs & Stratton.
Top Page Image Contents