Bolens 247.77635 manual Safety, Training

Page 3

SAFETY

WARNING: This symbol points out important safety instructions which, if not followed, could endanger the personal safety and/or property of yourself and others. Read and follow all instructions in this manual before attempting to operate this machine. Failure to comply with these instructions may result in personal injury. When you see this symbol - heed its warning.

WARNING: Engine Exhaust, some of its constituents, and certain vehicle components contain or emit chemicals known to State of California to cause cancer and birth defects or other reproductive harm.

DANGER: This machine was built to be operated according to the rules for safe operation in this manual. As with any type of power equipment, carelessness or error on the part of the operator can result in serious injury. This machine is capable of amputating hands and feet and throwing objects. Failure to observe the following safety instructions could result in serious injury or death.

TRAINING

1.Read, understand, and follow all instructions on the machine and in the manual(s) before attempting to assemble and operate. Keep this manual in a safe place for future and regular reference and for ordering replacement parts.

2.Be familiar with all controls and their proper operation. Know how to stop the machine and disengage them quickly.

3.Never allow children under 16 years old to operate this machine. Children 16 years old and over should read and understand the operation instructions and safety rules in this manual and should be trained and supervised by a parent.

4.Never allow adults to operate this machine without proper instruction.

5.Keep bystanders, helpers, pets, and children at least 75 feet from the machine while it is in operation. Stop machine if anyone enters the area.

6.Never run an engine indoors or in a poorly ventilated area. Engine exhaust contains carbon monoxide, an odorless and deadly gas.

7.Do not put hands and feet near rotating parts or in the feeding chambers and discharge opening. Contact with the rotating impeller can amputate fingers, hands, and feet.

8.Never attempt to unclog the chipper chute or discharge opening, remove or empty bag, or inspect and repair the machine while the engine is running. Shut the engine off and wait until all moving parts have come to a complete stop. Disconnect spark plug wire and keep away from spark plug.

PREPARATION

1.Thoroughly inspect the area where the equipment is to be used. Remove all rocks, bottles, cans, or other foreign objects which could be picked up or thrown and cause personal injury or damage to the machine.

2.Always wear safety glasses or safety goggles during operation or while performing an adjustment or repair, to protect eyes. Thrown objects which ricochet can cause serious injury to the eyes.

3.Wear sturdy, rough-soled work shoes and close- fitting slacks and shirts. Loose fitting clothes or jewelry can be caught in movable parts. Never operate this machine in bare feet or sandals. Wear leather work gloves when feeding material in the chipper chute.

4.Before starting, check all bolts and screws for proper tightness to be sure the machine is in safe working condition. Also, visually inspect machine for any damage at frequent intervals.

5.To avoid personal injury or property damage use extreme care in handling gasoline. Gasoline is extremely flammable and the vapors are explosive. Serious personal injury can occur when gasoline is spilled on yourself or your clothes which can ignite. Wash your skin and change clothes immediately.

a.Use only an approved gasoline container.

b.Extinguish all cigarettes, cigars, pipes, and other sources of ignition.

c.Never fuel machine indoors.

d.Never remove gas cap or add fuel while the engine is hot or running.

e.Allow engine to cool at least two minutes before refueling.

f.Never over fill fuel tank. Fill tank to no more than 1/2 inch below bottom of filler neck to provide space for fuel expansion.

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Horse Power Model NoSears, Roebuck And Co., Hoffman Estates, IL 60179 U.S.A Warranty Table of ContentsTraining SafetyOperation Page Lowering the Chipper Chute AssemblyRemoving Unit From Carton Loose Parts In Carton See FigureDebris Collection Bag HousingAttaching The Debris Collection Bag Emptying the Debris Collection BagOperating Controls See Figure Meets Ansi safety standardsOperation Know Your Chipper ShredderHopper Gas And Oil Fill-upStopping Engine TamperFuel Fill-up Starting EngineGasoline Type of FuelClearing the Hopper ShreddingChipping Cleaning the Reduction ChamberMaintenance Air CleanerLubrication Cleaning Engine Spark PlugChanging Oil Replacing the Shredder Blade Service and AdjustmentsDisconnecting Spark Plug Replacing the Chipper BladesChamber Carburetor AdjustmentStorage Chipper ShredderEngine Problem Cause Remedy TroubleshootingSears Emission Control Defects Warranty Coverage Sears Craftsman 7.5 H.P. Chipper Shredder Model Parts ListPart Description Sears Craftsman 7.5 H.P. Chipper Shredder Model Carburetor Gasket SET 222 Repair Manual Cylinder Assembly Nut Governor Control Lever 777S32258 777D07574 777S32272 Engine Labels247.776350 ÍndiceGarantía Garantía limitada de la cortadora trituradora CraftsmanCapacitación SeguridadFuncionamiento Motor Deslizamiento hacia abajo del canal de la cortadora MontajeExtracción de la unidad de la caja Piezas sueltas en la caja Ver FiguraColocación de la bolsa de recolección de desechos Vaciado de la bolsa de recolección de desechosControles de funcionamiento Ver Figura OperaciónConozca las propiedades de la cortadora trituradora Cumple con los estándares de seguridad de AnsiCarga de gas y aceite Detención del motorAceite se envía una botella de 20 onzas junto con la unidad Tipo de combustible Encendido del motorGasolina Advertencia Sea sumamenteCámara de reducción TrituraciónCorte Limpieza de la tolvaLimpieza del canal de reducción Mantenimiento LubricaciónFiltro de aire Limpieza del motor Bujía de encendidoCambio de aceite Desconexión de la bujía Servicio Y AjustesReemplazo de las hojas de la cortadora Reemplazo de la hoja de la trituradoraAjuste del carburador Cortadora trituradora AlmacenamientoProblema Causa Remedio Guía Para LA Solución DE ProblemasResponsabilidades del Propietario de la Garantía Acuerdo De Protección Para Reparaciones Repair Protection AgreementsMY-HOME1-800-469-4663 Your HomeOur Home Sears Parts & Repair Center

247.77635 specifications

The Bolens 247.77635 is a versatile and robust garden tractor designed to meet the needs of homeowners and landscaping enthusiasts alike. Known for its reliable performance and user-friendly features, this model caters to a wide range of outdoor tasks, from mowing lawns to hauling equipment.

At the heart of the Bolens 247.77635 is a powerful 24 horsepower engine, designed to deliver exceptional performance while maintaining fuel efficiency. This engine is mated to an automatic transmission system, providing seamless gear changes and allowing users to focus on their task without the hassle of manual shifting. The tractor's hydrostatic drive enhances maneuverability, making it suitable for navigating tight spaces and tackling uneven terrain.

One of the standout features of the Bolens 247.77635 is its 42-inch cutting deck. This deck allows for a wide cutting path, reducing mowing time while ensuring a clean and even cut. The deck is also adjustable, offering multiple height settings to accommodate different grass types and user preferences. The rear discharge chute efficiently directs clippings away from the mower, resulting in a neat finish and the option to mulch the clippings back into the lawn for added nutrients.

The tractor boasts a comfortable and ergonomic seating arrangement, allowing operators to handle extended periods of use without discomfort. The dashboard is equipped with easy-to-read gauges that provide essential information at a glance, including fuel level and engine status. This ensures that users can monitor their machine's performance without distractions.

Another significant characteristic of the Bolens 247.77635 is its versatility. The tractor is compatible with various attachments, such as snowblowers, tillers, and bagging systems. This adaptability transforms the garden tractor into a year-round workhorse, equipped to handle winter snow removal as well as spring and summer landscaping tasks.

Safety features have been carefully integrated into the design, ensuring a secure operating environment. The tractor includes a rollover protection system, a seatbelt, and easy-access controls that promote safe operation even in challenging conditions.

In conclusion, the Bolens 247.77635 is a feature-rich garden tractor combining power, comfort, and versatility. Its user-friendly design, coupled with robust capabilities, makes it an ideal choice for homeowners seeking efficiency and reliability in their outdoor maintenance efforts. With the Bolens 247.77635, tackling any yard task becomes a manageable and enjoyable experience.
Top Page Image Contents