Bolens 247.77635 manual Operation

Page 4

g.Replace gasoline cap and tighten securely.

h.If gasoline is spilled, wipe it off the engine and equipment. Move machine to another area. Wait 5 minutes before starting the engine.

i.Never store the machine or fuel container inside where there is an open flame, spark, or pilot light (e.g. furnace, water heater, space heater, clothes dryer, etc.)

j.To reduce a fire hazard, keep machine free of grass, leaves, or other debris build-up. Clean up oil or fuel spillage and remove any fuel soaked debris.

k.Allow machine to cool at least 5 minutes before storing.

OPERATION

1.Do not put hands and feet near rotating parts or in the feeding chambers and discharge opening. Contact with the rotating impeller can amputate fingers, hands, and feet.

2.Before starting the machine, make sure the chipper chute, feed intake, and cutting chamber are empty and free of all debris.

3.Thoroughly inspect all material to be shredded and remove any metal, rocks, bottles, cans, or other foreign objects which could cause personal injury or damage to the machine.

4.If it becomes necessary to push material through the shredder hopper, use a small diameter stick. Do not use your hands or feet.

5.If the impeller strikes a foreign object or if your machine should start making an unusual noise or vibration, immediately shut the engine off. Allow the impeller to come to a complete stop. Disconnect spark plug wire and keep away from spark plug. Perform the following steps:

a.Inspect for damage.

b.Repair or replace any damaged parts.

c.Check for any loose parts and tighten to assure continued safe operation.

6.Do not allow an accumulation of processed material to build up in the reduction chamber. This can prevent proper discharge and result in kickback of material through the feed opening.

7.Do not attempt to shred or chip material larger than specified on the machine or in this manual. Personal injury or machine damage could result.

8.Never attempt to unclog the chipper chute or discharge opening while the engine is running. Shut the engine off, wait until all moving parts have stopped, disconnect spark plug wire and keep away from spark plug before clearing debris.

9.Never operate without the shredder hopper, chipper chute, or chute deflector properly attached to the machine. Never install or remove debris collection bag while the engine is running.

10.Keep all guards, deflectors and safety devices in place and operating properly.

11.Keep your face and body back and to the side of the chipper chute while feeding material into the machine to avoid accidental kickback injuries.

12.Never operate this machine without good visibility or light.

13.Do not operate this machine on a paved, gravel or non-level surface.

14.Do not operate this machine while under the influence of alcohol or drugs.

15.Muffler and engine become hot and can cause a burn. Do not touch.

16.Never pick up or carry machine while the engine is running.

MAINTENANCE AND STORAGE

1.Never tamper with safety devices. Check their proper operation regularly.

2.Check bolts and screws for proper tightness at frequent intervals to keep the machine in safe working condition. Also, visually inspect machine for any damage and repair, if needed.

3.Before cleaning, repairing, or inspecting, stop the engine and make certain the impeller and all moving parts have stopped. Disconnect spark plug wire and keep away from spark plug to prevent unintended starting.

4.Do not change the engine governor settings or overspeed the engine. The governor controls the maximum safe operating speed of the engine.

5.Maintain or replace safety and instruction labels, as necessary.

6.Follow this manual for safe loading, unloading, transporting, and storage of this machine.

7.Never store the machine or fuel container inside where there is an open flame, spark or pilot light such as a water heater, furnace, clothes dryer, etc.

8.Always refer to the operator’s manual for proper instructions on off-season storage.

9.If the fuel tank has to be drained, do this outdoors.

10.Observe proper disposal laws and regulations for gas, oil, etc. to protect the environment.

WARNING: - YOUR RESPONSIBILITY: Restrict the use of this power machine to persons who read, understand and follow the warnings and instructions in this manual and on the machine.

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Model No Horse PowerSears, Roebuck And Co., Hoffman Estates, IL 60179 U.S.A Table of Contents WarrantySafety TrainingOperation Page Assembly Removing Unit From CartonLoose Parts In Carton See Figure Lowering the Chipper ChuteHousing Attaching The Debris Collection BagEmptying the Debris Collection Bag Debris Collection BagMeets Ansi safety standards OperationKnow Your Chipper Shredder Operating Controls See FigureGas And Oil Fill-up Stopping EngineTamper HopperStarting Engine GasolineType of Fuel Fuel Fill-upShredding Clearing the HopperCleaning the Reduction Chamber ChippingAir Cleaner MaintenanceLubrication Spark Plug Cleaning EngineChanging Oil Service and Adjustments Disconnecting Spark PlugReplacing the Chipper Blades Replacing the Shredder BladeCarburetor Adjustment ChamberChipper Shredder StorageEngine Troubleshooting Problem Cause RemedySears Emission Control Defects Warranty Coverage Parts List Sears Craftsman 7.5 H.P. Chipper Shredder ModelPart Description Sears Craftsman 7.5 H.P. Chipper Shredder Model Carburetor Gasket SET 222 Repair Manual Cylinder Assembly Nut Governor Control Lever Engine Labels 777S32258 777D07574 777S32272Índice GarantíaGarantía limitada de la cortadora trituradora Craftsman 247.776350Seguridad CapacitaciónFuncionamiento Motor Montaje Extracción de la unidad de la cajaPiezas sueltas en la caja Ver Figura Deslizamiento hacia abajo del canal de la cortadoraVaciado de la bolsa de recolección de desechos Colocación de la bolsa de recolección de desechosOperación Conozca las propiedades de la cortadora trituradoraCumple con los estándares de seguridad de Ansi Controles de funcionamiento Ver FiguraDetención del motor Carga de gas y aceiteAceite se envía una botella de 20 onzas junto con la unidad Encendido del motor GasolinaAdvertencia Sea sumamente Tipo de combustibleTrituración CorteLimpieza de la tolva Cámara de reducciónLimpieza del canal de reducción Lubricación MantenimientoFiltro de aire Bujía de encendido Limpieza del motorCambio de aceite Servicio Y Ajustes Reemplazo de las hojas de la cortadoraReemplazo de la hoja de la trituradora Desconexión de la bujíaAjuste del carburador Almacenamiento Cortadora trituradoraGuía Para LA Solución DE Problemas Problema Causa RemedioResponsabilidades del Propietario de la Garantía Repair Protection Agreements Acuerdo De Protección Para ReparacionesYour Home Our HomeSears Parts & Repair Center MY-HOME1-800-469-4663

247.77635 specifications

The Bolens 247.77635 is a versatile and robust garden tractor designed to meet the needs of homeowners and landscaping enthusiasts alike. Known for its reliable performance and user-friendly features, this model caters to a wide range of outdoor tasks, from mowing lawns to hauling equipment.

At the heart of the Bolens 247.77635 is a powerful 24 horsepower engine, designed to deliver exceptional performance while maintaining fuel efficiency. This engine is mated to an automatic transmission system, providing seamless gear changes and allowing users to focus on their task without the hassle of manual shifting. The tractor's hydrostatic drive enhances maneuverability, making it suitable for navigating tight spaces and tackling uneven terrain.

One of the standout features of the Bolens 247.77635 is its 42-inch cutting deck. This deck allows for a wide cutting path, reducing mowing time while ensuring a clean and even cut. The deck is also adjustable, offering multiple height settings to accommodate different grass types and user preferences. The rear discharge chute efficiently directs clippings away from the mower, resulting in a neat finish and the option to mulch the clippings back into the lawn for added nutrients.

The tractor boasts a comfortable and ergonomic seating arrangement, allowing operators to handle extended periods of use without discomfort. The dashboard is equipped with easy-to-read gauges that provide essential information at a glance, including fuel level and engine status. This ensures that users can monitor their machine's performance without distractions.

Another significant characteristic of the Bolens 247.77635 is its versatility. The tractor is compatible with various attachments, such as snowblowers, tillers, and bagging systems. This adaptability transforms the garden tractor into a year-round workhorse, equipped to handle winter snow removal as well as spring and summer landscaping tasks.

Safety features have been carefully integrated into the design, ensuring a secure operating environment. The tractor includes a rollover protection system, a seatbelt, and easy-access controls that promote safe operation even in challenging conditions.

In conclusion, the Bolens 247.77635 is a feature-rich garden tractor combining power, comfort, and versatility. Its user-friendly design, coupled with robust capabilities, makes it an ideal choice for homeowners seeking efficiency and reliability in their outdoor maintenance efforts. With the Bolens 247.77635, tackling any yard task becomes a manageable and enjoyable experience.
Top Page Image Contents