Blue Rhino 153300 owner manual Operation, Before Turning Gas Supply on, Before Lighting

Page 14

Contact 1-800-762-1142 for assistance.

Do not return to place of purchase.

WARNING

FOR YOUR SAFETY:

If at any time you are unable to light pilot and smell gas, wait 5 minutes to allow gas to dissipate before attempting to light heater.

WARNING

FOR YOUR SAFETY:

Do NOT touch or move heater for at least 45 minutes after use.

Allow all burner elements to cool before touching.

Operation

Caution: Do NOT attempt to operate heater until you have read and understand all precautions in section 1 “Safety First.”

Before Turning Gas Supply ON

•Your heater was designed and approved for outdoor use only. Do NOT use it inside a building, garage, or any other enclosed area.

•Disconnect the LP source and move the cylinder to a well-ventilated area outdoors, out of the reach of children. The cylinder must not be stored in a building, garage, or any other enclosed area.

•Ensure that there is no obstruction to air ventilation.

•Be sure all gas connections are tight and there are no leaks.

•Be sure the cylinder cover is clear of debris.

•Be sure any component removed during assembly or servicing are replaced and fastened prior to starting.

Before Lighting

View Hole

•Heater should be thoroughly inspected before each use, and by a qualified service person at least annually.

•If relighting a hot heater, always wait at least 5 minutes.

•Inspect the hose assembly for evidence of excessive abrasion, cuts, or wear. Suspected areas should be leak tested. If the hose leaks, it must be replaced prior to operation. Only use the replacement hose assembly specified by manufacturer.

Pilot

LOW

(Push in)

 

HIGHOFF

Pilot

LOW

(Push in)

 

HIGHOFF

13

Lighting

Note: This heater is equipped with a Pilot Light that allows for safer startups and shutdowns. Pilot must be lit before Main Burner can be started.

•Turn Cylinder Valve OFF.

•Push Control Knob IN and turn to OFF.

•Wait 5 minutes for any gas to clear.

•Turn Cylinder Valve ON.

•Open Viewing Hole by sliding cover to either side.

•Push Control Knob IN and rotate to Pilot position.

•Note - For initial start or after any cylinder change, hold Control Knob IN for 2 minutes to purge air from gas lines before proceeding.

•Push Igniter button once. Pilot Light flame will appear and be visible through Viewing Hole.

•Release Control Knob after 30 seconds. Pilot Light will remain lit. If not, return to step 1.

Owner’s manual and assembly instructions: model 153300 outdoor patio heater

3/28/03

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Manual del Usuario For Outdoor Use Only outside any enclosure 28/03 Safety First For Your Safety 20 lb. LP CylinderPicture Qty Attach Legs to Base General Components & FeaturesAdditional Requirements Assemble Cup, Plate & Ring to Cap Attach Cap Assembly to Legs/Insert Gas LineAttach Cylinder Shroud to Legs Attach Engine to Post Assemble Emitter TopAssemble Emitter Connect Engine/Post Assembly to Cap Connect Gas Line to EngineConnect Gas Line to Cylinder Attach Dome to EmitterSecure Gas Line Check for Leaks Check Gas Line / Cylinder valve for leaksInstall Cylinder Access Panel Replace Engine Access PanelBefore Lighting OperationBefore Turning Gas Supply on LightingShut Down When heater is onRe-lighting Before Operating After OperationIf the problem is This condition exists Then do this Maintenance Between uses ServiceDuring periods of extended inactivity or when transporting Warranty Period Rating Safety FeaturesCertifications Heat RangeAdvertencia Índice ¡La Seguridad, lo Primero Pour Votre SécuritéBouteille de gaz de 9 kg Componentes FerreteríaPaso 1 Acoplar las patas a la base Componentes Generales y CaracterísticasRequisitos Adicionales Paso 2 Acoplar la protección de la bombona a las patas Paso 3 Montar la copa, la placa y el anillo en la cubiertaPaso 7 Acoplar el motor al poste Paso 5 Montar la cubierta del emisorPaso 6 Montar el emisor Paso 8 Conectar el conjunto motor/poste a la cubierta Paso 9 Conectar la línea de gas al motorPaso 12 Conectar la línea de gas a la bombona Paso 10 Acoplar la cúpula al emisorPaso 11 Asegurar la línea de gas Paso 13 Comprobar si hay fugas Compruebe si hay fugas en la línea de gas/bombonaPaso 14 Montar el panel de acceso a la bombona Paso 15 Volver a colocar el panel de acceso al motorAntes del encendido OperaciónAntes de activar la alimentación de gas on Apagado Cuando el calentador está encendido onReencendido Antes de la puesta en marcha Tras su funcionamientoAcumulación de carbonilla Advertencia MantenimientoDurante períodos largos de inactividad o para su transporte ServicioEntre uso y uso Período de Garantía Alcance calorífico CertificacionesConsumo CombustibleNASDAQ-RINO

153300 specifications

Blue Rhino 153300 is a robust and reliable propane tank exchange system that has gained widespread recognition among consumers looking for convenience and efficiency. Known for its superior design and innovative technology, this product provides an ideal solution for outdoor grilling, heating, and other applications that require propane fuel.

One of the standout features of the Blue Rhino 153300 is its 20-pound propane tank capacity, which is suitable for most residential outdoor grills. This size is particularly advantageous for backyard barbecue enthusiasts who want to enjoy long cooking times without the worry of running out of fuel. The tank is constructed from durable steel, ensuring it can withstand the elements while maintaining safety during storage and use.

The Blue Rhino 153300 incorporates an automatic shut-off system, a critical feature that enhances safety and prevents overfilling during exchanges. This technology ensures that users can replace their tanks with peace of mind, knowing that they are protected against potential hazards. Furthermore, the product adheres to the highest safety standards, and its cylinder design includes rust-resistant coatings to prolong its lifespan.

Another characteristic worth noting is the convenience of the Blue Rhino tank exchange program. Users can easily return their empty tanks and receive a fully refilled tank at various participating retailers, making it a hassle-free experience. This widespread retail network ensures that customers have easy access to propane refills, minimizing downtime during grilling sessions.

The tank is also designed with a comfortable handle and a balanced structure that facilitates easy lifting and maneuvering. Its compact shape allows it to fit conveniently in traditional outdoor grilling spaces while still providing a significant amount of fuel for extensive grilling sessions.

In summary, the Blue Rhino 153300 represents an excellent choice for consumers who value safety, convenience, and efficiency in their propane tank needs. With its durable construction, innovative technologies, and easy exchange program, it stands out as a leader in the market, ensuring that outdoor cooking experiences are enjoyable and worry-free. Whether you’re an occasional griller or a barbecue aficionado, the Blue Rhino 153300 propane tank delivers the reliable performance you expect.
Top Page Image Contents