Replacing Mower Blade, PTO Belt Deck Belt | Ariens 911413 specification

PTO Belt		Deck Belt
1.	Stop engine, remove key, wait for all	1.	Stop engine, remove key, wait for all
	moving parts to stop and hot parts to		moving parts to stop and hot parts to
	cool.		cool.
2.	Remove the two drive belts from engine	2.	Remove the two drive belts from engine
	pulley. See Wheel Drive Belts on		pulley. See Wheel Drive Belts on
	page 21.		page 21.
3.	Remove the belt cover from the deck.	3.	Remove the PTO belt from the PTO
4.	Disconnect the two idler springs from the	4.	clutch. See PTO Belt on page 22.
	spring anchors.	4.	Remove the two idler arms from the
NOTE: Do not remove the bolt holding the		5.	deck.
engine pulley to the crankshaft. Loosen it		5.	Remove the deck belt and install the
enough so the PTO belt clears the belt finger.			new belt.
5.	Loosen the bolt holding the engine	6.	Replace the two idler arms on the deck.
	pulley to the crankshaft and slide the	7.	Replace the PTO belt on the PTO clutch.
	pulley down until the PTO belt can be	REPLACING MOWER BLADE
6.	removed from the pulley.	REPLACING MOWER BLADE
6.	Install the new belt on the engine pulley	Remove (Figure 17)
	and on the deck pulleys.	Remove (Figure 17)
7.	Push the engine pulley up the crankshaft
	and tighten the mounting bolt to 55 lbf-ft		CAUTION: Mower blades are
	(74.5 N•m).		CAUTION: Mower blades are
	(74.5 N•m).		sharp and can cut you. Wrap the
8.	Connect the two idler springs to spring		sharp and can cut you. Wrap the
8.	Connect the two idler springs to spring		blades or wear gloves, and use
	anchors.		blades or wear gloves, and use
	anchors.		extra caution when servicing
9.	Replace the belt cover.		extra caution when servicing
9.	Replace the belt cover.		them.

10. Replace the wheel two drive belts on the
	engine pulley.					1. Block mower blades to prevent rotation.
						1. Block mower blades to prevent rotation.
		Rear of Unit				2. Remove mounting hardware and mower
		2				blades from mower deck.
	1	2				Install (Figure 17)
	1			4	5	Install (Figure 17)
				4	5	1. Install mower blades on spindles with
						mounting hardware.
						2. Torque 5/8-inch nut to 92 to 130 lbf-ft
	3					(125 to 176 N•m).
	3
									1
									2
				6					3
		5	4	3
		5	4
1. PTO Belt			4. Tension						4
1. PTO Belt			4. Tension
2.	Engine Pulley			Spring		1.	Spindle	3.	Washer
3.	Idler Arm		5. Spring Anchor			1.	Spindle	3.	Washer
			6.	Deck Belt		2.	Blade	4.	5/8 in. Nut
		Figure 16					Figure 17
							Figure 17
					GB - 22

911413 specifications

The Ariens 911413 is a powerful and robust snow blower designed to tackle some of the toughest winter conditions. Renowned for its performance and durability, this machine is a favorite among homeowners who face heavy snowfall. One of its main features is the strong 420cc Ariens AX420 engine, which provides ample power for clearing snow with ease. This engine is designed for reliability and efficiency, ensuring that the machine can get the job done without the need for frequent maintenance.

The Ariens 911413 boasts a 24-inch clearing width, allowing it to handle large areas quickly. It can throw snow up to 50 feet, making it an ideal choice for those with long driveways or large outdoor spaces. The snow blower is equipped with a heavy-duty steel auger system that efficiently breaks up and collects snow, ensuring that no snow is left behind. This construction guarantees superior performance even in the most challenging winter conditions.

In terms of technology, the Ariens 911413 features a 6-speed forward and 2-speed reverse transmission, providing users with greater control and flexibility when navigating through deep snow. The self-propelled system allows for effortless movement, reducing user fatigue during operation. Additionally, the machine includes an adjustable discharge chute that can be rotated 200 degrees, enabling users to direct the snow precisely where they want it to go.

Another notable characteristic of the Ariens 911413 is its ergonomic design. The machine comes with heated hand grips, which add comfort during use in frigid temperatures. The quick-release chute clean-out tool simplifies maintenance and ensures that the discharge chute remains clear during operation.

Durability is a key feature of the Ariens 911413, with its heavy-gauge steel frame and reinforced auger housing designed to withstand rigorous use over the years. The snow blower is built to last, giving users peace of mind as they invest in a reliable winter tool. When it comes to performance, features, and efficiency, the Ariens 911413 stands out as a top choice for winter snow removal, providing excellent value and performance for those looking to conquer cold weather challenges.

PTO Belt

Deck Belt

pulley. See Wheel Drive Belts on

REPLACING MOWER BLADE

Remove (Figure 17)

Install (Figure 17)

911413 specifications