Ariens 911413 Cleaning Battery and Battery Cables or Figure, Charging the Battery, Jump-Starting

Page 25

4

2

3

 

2

1.

Battery Mount

3.

Battery

2.

Bracket

4.

Battery Hold-

New Mount

 

down Bracket

 

Location and

 

 

 

Hardware

 

 

Figure 21

Cleaning Battery and Battery Cables (Figure 18 or Figure 19)

1.Remove the battery cover (if equipped).

2.Disconnect negative (–) cable first, then positive (+) cable.

3.Clean battery cable ends, negative (–) terminal, and positive (+) terminal with a wire brush and rinse with a weak baking soda solution.

4.Connect positive (+) cable first, then negative (–) cable.

5.Apply petroleum jelly or dielectric grease to battery cable ends and terminals.

6.Replace cover (if equipped).

Charging the Battery

WARNING: FROZEN

BATTERIES CAN EXPLODE

and result in death or serious injury. DO NOT charge a frozen battery. Let the battery thaw before charging.

Follow First Aid directions for contact with battery fluid.

External Contact: Flush with water.

Eyes: Flush with water for at least 15 minutes and get medical attention immediately!

Internal Contact: Drink large quantities of water. Follow with Milk of Magnesia, beaten egg or vegetable oil. Get medical attention immediately!

In case of internal contact, DO NOT induce vomiting!

IMPORTANT: DO NOT fast charge. Charging at a higher rate will damage or destroy battery.

IMPORTANT: ALWAYS follow information provided on battery and battery charger. Contact battery and battery charger manufacturers’ for detailed instructions.

1.Remove battery from unit.

2.Place battery in a well-ventilated area.

3.Connect positive (+) lead of charger to positive (+) terminal, and negative (–) lead of charger to negative (–) terminal.

4.Charge battery according to battery charger and battery manufacturers’ instructions.

5.Install battery on unit.

Jump-Starting

Ariens does not recommend jump-starting your unit. Jump-starting can damage engine and electrical system components. See your engine manual for more detailed information.

GB - 25

Image 25
Contents Wide Area Walk Mower Introduction Table of ContentsProduct Registration Unauthorized Replacement Parts Dealer DeliveryDisclaimer Safety Alerts SafetyNotations Practices and LawsDismemberment Hazard Safety Decals LocationsDischarge Hazard Emission Control System Safety RulesPage Page Carton Contents AssemblyAssembly Negative Battery Cable Figure Controls and Features Cutting Height Adjustment Controls and FeaturesOperation Parking Brake Lever Right Hand LeverPage Forward Drive Control Lower Right Hand Control Filling the Fuel TankReverse Drive Control Side Right Hand Control Emergency Stopping GasolineStarting and Shut OFF Maintenance Schedule MaintenanceSharpen the Mower Blades Check Drive Belts Check AIR CleanerCheck Fasteners Change Engine OILForward/Reverse Drive Controls Service and AdjustmentsWheel Drive Belts Belt ReplacementReplacing Mower Blade Install FigurePTO Belt Deck Belt Remove FigureU1 Battery Removal and Installation Figure Remove Servicing the BatteryInstall Install U1-Size Battery Figure Charging the Battery Cleaning Battery and Battery Cables or FigureJump-Starting Storage TroubleshootingAccessories Service PartsSpecifications Consumer Mowing Equipment Limited Warranty Limitation of Remedy and Damages

911413 specifications

The Ariens 911413 is a powerful and robust snow blower designed to tackle some of the toughest winter conditions. Renowned for its performance and durability, this machine is a favorite among homeowners who face heavy snowfall. One of its main features is the strong 420cc Ariens AX420 engine, which provides ample power for clearing snow with ease. This engine is designed for reliability and efficiency, ensuring that the machine can get the job done without the need for frequent maintenance.

The Ariens 911413 boasts a 24-inch clearing width, allowing it to handle large areas quickly. It can throw snow up to 50 feet, making it an ideal choice for those with long driveways or large outdoor spaces. The snow blower is equipped with a heavy-duty steel auger system that efficiently breaks up and collects snow, ensuring that no snow is left behind. This construction guarantees superior performance even in the most challenging winter conditions.

In terms of technology, the Ariens 911413 features a 6-speed forward and 2-speed reverse transmission, providing users with greater control and flexibility when navigating through deep snow. The self-propelled system allows for effortless movement, reducing user fatigue during operation. Additionally, the machine includes an adjustable discharge chute that can be rotated 200 degrees, enabling users to direct the snow precisely where they want it to go.

Another notable characteristic of the Ariens 911413 is its ergonomic design. The machine comes with heated hand grips, which add comfort during use in frigid temperatures. The quick-release chute clean-out tool simplifies maintenance and ensures that the discharge chute remains clear during operation.

Durability is a key feature of the Ariens 911413, with its heavy-gauge steel frame and reinforced auger housing designed to withstand rigorous use over the years. The snow blower is built to last, giving users peace of mind as they invest in a reliable winter tool. When it comes to performance, features, and efficiency, the Ariens 911413 stands out as a top choice for winter snow removal, providing excellent value and performance for those looking to conquer cold weather challenges.