Ariens 911413 guide

•NO Smoking!

•NO Sparks!

•NO Flames!

•Allow engine to cool before filling fuel tank.

Properly remove fuel before tipping unit. Never fill containers inside a vehicle or on a truck or trailer bed with a plastic liner. Always place containers on the ground away from your vehicle before filling.

When practical, remove gas-powered equipment from the truck or trailer and refuel it on the ground. If this is not possible, then refuel such equipment on a trailer with a portable container, rather than from a gasoline dispenser nozzle.

Keep the nozzle in contact with the rim of the fuel tank or container opening at all times until fueling is complete. Do not use a nozzle lock- open device.

Check fuel supply before starting engine. DO NOT fill gasoline tank indoors, when engine is running, or while engine is hot.

Allow engine to cool several minutes before removing fuel cap.

DO NOT overfill. Allow about 1/4" (6 mm) of tank space for fuel expansion.

Replace gasoline tank cap securely and clean any spilled fuel before starting engine. If fuel is spilled on clothing, change clothing immediately.

NEVER store fuel inside where there is an open flame, such as a water heater. ALWAYS drain fuel outdoors away from ignition sources.

ALWAYS shut off engine and remove key when transporting unit on a truck or trailer. Avoid Electric Shock. DO NOT disconnect wire from spark plug while engine is running. Do NOT put battery in fire or mutilate. Explosive Gases!

NO flames, NO sparks, NO smoking, near battery.

Poisonous battery fluid contains sulfuric acid. Contact with skin, eyes or clothing can cause severe chemical burns.

ALWAYS wear safety glasses and protective gear near battery.

ALWAYS keep batteries out of reach of children.

Battery posts, terminals and related accessories contain lead and lead compounds, chemicals known to the State of California to cause cancer and reproductive harm. Wash hands after handling.

Charge batteries in an open, well-ventilated area, away from spark and flames. Unplug charger before connecting or disconnecting battery. Wear protective clothing and use insulated tools.

Accidental engine start up can cause death or serious injury. Except where specifically recommended, ALWAYS stop engine, remove key (electric start models), wait for moving parts to stop, allow parts to cool and disconnect spark plug wire before inspecting, servicing, adjusting or repairing unit.

Keep mower free of grass, leaves, or other debris build-up.

Keep equipment in good condition. Maintain or replace safety and instruction labels, as necessary.

Follow engine manufacturer’s safety instruction when servicing engine. Check all hardware at regular intervals, especially blade attachment bolts. Keep all hardware properly tightened.

An extension spring, when extended, stores energy and can be dangerous. Always use tools specifically designed for installing or removing an extension spring. Always compress or extend springs slowly.

Before tipping unit, remove fuel and battery (if equipped).

Use extra care when loading or unloading unit onto trailer or truck.

Ensure all wheel blocks, jack stands and tie downs will support unit during maintenance. Replace worn-out mufflers immediately.

Continued use could result in fire or explosion.

Sharp edges can cut or amputate fingers or a hand. Wrap blade or wear sturdy gloves to service.

Only replace blades. NEVER straighten or weld blades.

Use only replacement parts designed for your unit. See your Ariens Dealer.

Allow engine to cool before storing in any enclosure.

ALWAYS clean unit before extended storage. See engine manual for proper storage.

DO NOT store unit inside a building with fuel in the fuel tank where any ignition sources are present.

Use only accessories which have been approved by Ariens and are properly installed.

Use only accessories or attachments that are designed for your unit and that can be used safely on your terrain.

Check attachments frequently and replace worn or damaged components with manufacturer’s recommended parts.

GB - 9

911413 specifications

The Ariens 911413 is a powerful and robust snow blower designed to tackle some of the toughest winter conditions. Renowned for its performance and durability, this machine is a favorite among homeowners who face heavy snowfall. One of its main features is the strong 420cc Ariens AX420 engine, which provides ample power for clearing snow with ease. This engine is designed for reliability and efficiency, ensuring that the machine can get the job done without the need for frequent maintenance.

The Ariens 911413 boasts a 24-inch clearing width, allowing it to handle large areas quickly. It can throw snow up to 50 feet, making it an ideal choice for those with long driveways or large outdoor spaces. The snow blower is equipped with a heavy-duty steel auger system that efficiently breaks up and collects snow, ensuring that no snow is left behind. This construction guarantees superior performance even in the most challenging winter conditions.

In terms of technology, the Ariens 911413 features a 6-speed forward and 2-speed reverse transmission, providing users with greater control and flexibility when navigating through deep snow. The self-propelled system allows for effortless movement, reducing user fatigue during operation. Additionally, the machine includes an adjustable discharge chute that can be rotated 200 degrees, enabling users to direct the snow precisely where they want it to go.

Another notable characteristic of the Ariens 911413 is its ergonomic design. The machine comes with heated hand grips, which add comfort during use in frigid temperatures. The quick-release chute clean-out tool simplifies maintenance and ensures that the discharge chute remains clear during operation.

Durability is a key feature of the Ariens 911413, with its heavy-gauge steel frame and reinforced auger housing designed to withstand rigorous use over the years. The snow blower is built to last, giving users peace of mind as they invest in a reliable winter tool. When it comes to performance, features, and efficiency, the Ariens 911413 stands out as a top choice for winter snow removal, providing excellent value and performance for those looking to conquer cold weather challenges.