2 0
C o n f i g u r i n g t h e d i g i t a l s u r r o u n d c o n t r o l l e r
Stage 3: Configuring sources
The digital surround controller provides up to 12 sources corresponding to the 12 source keys on the MSR+:
CD, RADIO, DVD, AUX, DISC, TAPE, TV, CABLE, SAT, VCR1, VCR2, GAME.
For each source the Configure sources stage allows you to configure a series of options, including:
•Whether it is in use.
•The label used for it on the
•The audio input it selects.
•The TRIGGER output level it selects.
The procedure for doing this is as follows.
To configure a source
Either:
• Press Next after configuring speakers; see page 18.
Or:
•Press Wizard; see page 15.
•Press Skip to skip past the Reset settings and Select speakers menus.
The display shows the title screen for stage 3:
Press More for help
3: Configure sources
Back Enter Skip
• Press Enter to proceed or Skip to go to stage 4.
The display shows the first source and the first configuration option for that source, whether it is in use:
| This source is: |
Radio | in use |
Source Back | Next óòô öõú |
• Press Next or Back to step between options.
The top line of the display shows a description of each option, and its current value is shown to the right of the source name.
When changing the source name, Next and Back step between character positions.
The options are summarised in the table on the next page.
To change an option
•Press A or V to step through the alternative values for the option.
To move to the next source
• Press Source.
When you have finished configuring sources:
Either:
•Press Next on the last option of the last source (Game) to proceed to configuring settings, as described in the next section.
Or:
• Press On/Off to return to standby.