Meridian Audio G61 manual Defining your own presets, To save the preset settings, For example

Defining your own presets

The G61 Digital Surround Controller allows you to modify any of the built-in presets, and save them for future use.

You can either save the changes to the built-in preset, or you can create up to 10 presets of your own, with names of your choice, so you can use them alongside the built-in presets.

To save the preset settings

•Make sure the menus are unlocked; see To run the Configuration Wizard, page 15.

•Press DSP to select the preset you want to modify.

•Change the preset parameters to the values you want to store.

•Press More then Store, or Function + Store on the MSR+.

The display shows the next available user-defined preset. For example:

Pick Preset User 1 to overwrite

Store óòô öõú

•If you want to overwrite an existing user-defined preset press A to select the preset you want to overwrite.

For example:

Pick Preset Classical to overwrite

Store óòô öõú

Alternatively press V to choose the built-in preset you started with. For example:

Pick Preset Trifield to overwrite

Store óòô öõú

• Press Store.

The settings have been stored in the new or existing preset you selected.

If you are defining a user preset you can now edit the name of the preset if you wish.

A flashing cursor shows the letter you are editing:

Write label User 1 for preset

ìî ïñ óòô öõú Store

•Press > or < to select the character position you want to edit.

•Press A or V to change the character.

Each press steps through the sequence A to Z, a to z, 0 to 9, full stop, and blank. You can also select a blank directly by pressing Clear on the MSR+.

4 3

D S P p r e s e t s