2 2
C o n f i g u r i n g t h e d i g i t a l s u r r o u n d c o n t r o l l e r
Stage 4: Configuring other settings
The next stage allows you to configure other aspects of the product’s operation.
To configure other settings
Either:
• Press Next after configuring the sources; see page 20.
Or:
•Press Wizard; see page 15.
•Press Skip to skip past the stages 1 to 3.
The display shows the title screen for stage 4:
Press More for help
4: Other settings
Back Enter Skip
•Press Enter to proceed or Skip to go to the calibration procedure.
The first setting is displayed:
The fan is:
used as necessary
Back Next óòô öõú
To change a setting
•Press A or V to step through the alternative values for the setting.
When you have finished configuring the settings:
Either:
•Press Next to proceed to calibrating the system, as described in the next chapter.
Or:
• Press On/Off to return to standby.
A description of each setting is shown on the top line of the display, and its current value is shown to the right of the display.
The settings are summarised in the table on the next page.