Meridian Audio G61 manual Fine tuning, Left Distance, Left Phase, Setting What it sounds like

2 8

C a l i b r a t i n g t h e s y s t e m

•Use > and < to move between each of the speakers in the layout.

The display shows the speaker being tested, and the distance:

Press More for help

Left Distance 18'0

Units ìî ïñ óòô öõú

•Use A and V to change the distance.

•You can press Units to change between feet/inches and metres.

Repeat this for each of the speakers in your layout.

• Press > to proceed to the next calibration stage.

Fine tuning

These tests allow you to fine-tune the phase and delay of each speaker when used in conjunction with other speakers on the layout.

•Use > and < to move between each of the speakers in the layout.

The first display allows you to adjust the phase. For example:

Press More for help

Left	Phase	+
ìî	ïñ	óòô öõú

The next display shows the distance for the same speaker. For example:

Press More for help

Left Distance 18'0

ìî ïñ óòô öõú

• Choose the correct setting as follows:

Setting	What it sounds like
Correct	The sound between the speakers is very even, and
	does not change radically as you move your head.
Incorrect	The sound appears diffused, and changes in timbre
	and apparent location as you move your head.

Pay particular attention to the centre channel, as this can have a dramatic effect on the overall sound.

• Press > to proceed to the next calibration stage.