Meridian Audio G61 manual TV Logic, Mono DSP preset parameters, Parameter Options

3 9

D S P p r e s e t s

TV Logic

TV Logic is a Logic preset based on Pro Logic IIx with the addition of user-adjustable steering, designed to give higher intelligibility and a more appropriate spatial presentation for studio-based TV material.

TV Logic DSP preset parameters
Parameter	Options	What it changes
Roll	Off, Low, Med, Max	The degree of left-right steering.
Yaw	Off, Low, Med, Max	The degree of front-rear steering.
Surrounds	Rear, Side, All	Which of the surround channels are generated by steering.

Mono

In the Mono DSP preset you can choose to listen to:

•Only one of two input channels, such as when different languages or material are carried on each channel.

•A combined version of the two input channels, such as if the material was originally mono and has been conveyed on a two- channel carrier.

Mono DSP preset parameters

If Party? is set to No, the combined or selected signal is played only through the centre speaker, or the left and right speakers if there is no centre, to centrally localise high-frequency hiss and clicks.

Note: If Party? is set to Yes, full range bass is played through any speakers that are not supplemented by a subwoofer, and this may damage small speakers at high volume levels.

Parameter	Options
Input	Auto L+R, Input L, Input R, Input L+R
Academy	Off or On
Party?	No or Yes

What it changes

The channel selected.

Select On to include an equalisation (recommended by Lucasfilm Ltd) to correct for a high-frequency balance in some old mono films.

Select Yes to play the mono signal through all speakers, including subwoofers.