Alamo 1595 manual Assembling Quick Attach Device, Installing Quick Attach Device

ASSEMBLY

Assembling Quick Attach Device

Quick attach device can be installed using tools ordinarily available.

Torque all hardware to specifications listed in loader operator’s manual.

Shut off the tractor engine and engage the tractor brakes during installation.

Only quick attach, skid steer compatible attachments can be used with the quick attach device. Pin on style attachments can be used on the loader, but necessitate removal of the quick attach device and relocation of the bucket level indicator.

All references to left and right used in these instructions are as they would appear to the operator standing at the rear of the unit facing forward.

1.Quick attach device is pre-assembled at the factory.

2.Unband the quick attach device and wood blocks (Image Asm-L-0012)

Installing Quick Attach Device

ASSEMBLY

1.Fasten quick attach device to lower boom arms and bucket tilt cylinders using 1”x4-3/8” anti-rotation pins, 3/8” x 3/4” shoulder bolts, and 3/8” lock nuts (supplied with loader). Figure Asm-L-0014

2.Attach bucket leveling rod indicator (supplied with loader), to outside of right ear on quick attach as shown. Figure Asm-L-0014. Secure bucket leveling rod indicator with two 1/8” x 1” cotter pins (supplied with loader).

1595 01/11 Assembly Section 3-7

© 2011 Alamo Group Inc.