Dolmar PE-251 Safety Instructions, General Instructions, Intended use of the machine

Page 3

SAFETY INSTRUCTIONS

General Instructions

To ensure correct operation, user has to read this instruction manual to make himself familiar with the handling of the Edging trimmer. Users insufficiently informed will risk danger to themselves as well as others due to improper handling.

It is recommended only to lend the Edging trimmer to people who have proven to be experienced with Edging trimmers.

Always hand over the instruction manual.

First users should ask the dealer for basic instructions to familiarize oneself with the handling of an engine powered cutter.

Children and young persons aged under 18 years must not be allowed to operate the Edging trimmer. Persons over the age of 16 years may however use the device for the purpose of being trained only whilst under supervi- sion of a qualified trainer.

Use Edging trimmers with the utmost care and attention.

Operate the Edging trimmer only if you are in good physical condition. Perform all work calmly and carefully. The user has to accept liability for others.

Never use the Edging trimmer after consumption of alcohol or drugs, or if feeling tired or ill.

Intended use of the machine

– Use the unit only for edging the grass, lawn or weeds.

Personal protective equipment

The clothing worn should be functional and appropriate, i.e. it should be tight-fitting but not cause hindrance. Do not wear either jewelry or clothing which could become entangled with bushes or shrubs.

In order to avoid either head-, eye-, hand-or foot injuries as well as to protect your hearing the following protective equipment and protective clothing must be used during operation of the Edging trimmer.

Always wear a helmet where there is a risk of falling objects. The protec- tive helmet (1) is to be checked at regular intervals for damage and is to be replaced at the latest after 5 years. Use only approved protective helmets.

The visor (2) of the helmet (or alternatively goggles) protects the face from flying debris and stones. During operation of the Edging trimmer always wear goggles, or a visor to prevent eye injuries.

Wear adequate noise protection equipment to avoid hearing impairment (ear muffs (3), ear plugs etc.).

The work overalls (4) protect against flying stones and debris. We strongly recommend that the user wears work overalls.

Special gloves (5) made of thick leather are part of the prescribed equipment and must always be worn during operation of the Edging trimmer.

When using the Edging trimmer, always wear sturdy shoes (6) with a non- slip sole. This protects against injuries and ensures a good footing.

Starting up the Edging Trimmer

Please make sure that there are no children or other people within a working range of 15 meters (50ft), also pay attention to any animals in the working vicinity.

Before use always check that the Edging trimmer is safe for operation: Check the security of the cutting tool, the control lever for easy action and check for proper functioning of the control lever lock.

Rotation of the cutting tool during idling speed is not allowed. Check with your dealer for adjustment if in doubt. Check for clean and dry handles and test the function of the start/stop switch.

3

Image 3
Contents PE-251 English SymbolsPersonal protective equipment Safety InstructionsGeneral Instructions Intended use of the machineRefuelling Cutting Blade Maintenance instructionsWhen asking for help, please give the following information Method of operationModel Technical Data PE-251Designation of Parts Designation of PartsAssembly of Engine and Shaft How to mount the control cableConnection of the switch cord Mounting of Handle Mounting of WheelMounting of Deflector FUELS/REFUELLING Handling fuelFuel and oil mixture Detachment Points in Operation and HOW to StopCorrect Handling of Machine Attachment of shoulder strapStopping Adjustment of LOW-SPEED Rotation IdlingServicing Instructions Daily checkup and maintenanceCleaning of air cleaner Servicing InstructionsSupply of grease to flexible shaft Cleaning of muffler exhaust portChecking the spark plug Supply of grease to gear caseMaintenance schedule Fault locationStorage Federal Emission Component Defect Warranty Obtaining Warranty Service HOW to Make a Claim Français SymbolesÉquipement personnel de protection Consignes DE SécuritéInstructions générales Utilisation spéciale de la machineMètres RavitaillementPremier secour Instructions de maintenanceMéthode d’utilisation Lame de coupePE-251 Caracteristiques Techniques PE-251Nomenclature DES Pièces Montage du câble de commande Assemblage DU Moteur ET DE L’ARBRERaccordement de la corde d’interrupteur Montage DE LA Poignée Montage DU VolantMontage DU Déflecteur CARBURANTS/RAVITAILLEMENT Retrait Manipulation Correcte DE LA MachineConsignes DE Mise EN Marche ET Arrêt DE LA Machine Fixation du harnaisReglage DE LA Marche a Petite Vitesse AU Ralenti ArrêtNettoyage du filtre à air Contrôle et opérations de maintenance réguliersInstructions Relatives AUX Réparations Instructions Relatives AUX RéparationsNettoyage de lorifice du pot déchappement Contôle de la bougie dallumageGraissage du carter de la boîte de vitesse Tête daspiration dans le réservoir de carburantPlan de maintenance RemisageLocalisation des défauts Lista de contenidos Página SimbolosEquipo Personal de Protección Instrucciones DE SeguridadInstrucciones generales Uso recomendado de la máquinaReabastecimiento Nunca rectificar o soldar las herramientas de corte dañadas Método de trabajoCuchilla de corte Instrucciones de mantenimientoModelo Datos Técnicos PE-251Denominacion DE Partes Denominación DE PartesMontaje DE Motor Y EJE Montaje del cable de controlEmpalme del cordón del interruptor Montaje DEL Manillar Montaje DE LA RuedaMontaje DEL Desviador COMBUSTIBLES/REABASTECIMIENTO Separación USO Correcto DE LA MáquinaPuntos Relacionados CON EL Manejo Y LA Parada Colocación de la correa para el hombroAjuste DEL Giro a Baja Velocidad Ralentí ParoInstrucciones DE Servicio Instrucciones DE ServicioLimpieza del filtro de aire Limpieza del orificio de salida del silenciador Comprobación de la BujíaSuministro de grasa a la caja de engranajes Cabezal de succión en el tanque de combustibleAlmacenamiento Page PO Box Alpharetta

PE-251 specifications

The Dolmar PE-251 is a versatile and powerful chainsaw designed for both professional and amateur use. Known for its reliability and robustness, this chainsaw is particularly well-suited for light to medium-duty tasks, making it an excellent choice for homeowners, gardeners, and small-scale forestry operations.

One of the standout features of the Dolmar PE-251 is its lightweight design, which enhances maneuverability and reduces user fatigue. Weighing in at just around 5.5 kg, it enables longer operating periods without compromising performance. The engine, with a displacement of 25.4 cc, delivers a high power-to-weight ratio, ensuring that users can tackle a range of cutting tasks, from trimming branches to felling smaller trees.

The Dolmar PE-251 is equipped with an advanced 2-stroke engine that not only provides exceptional power but also features low emissions, aligning with contemporary environmental standards. This technology ensures that users can work efficiently without contributing excessively to air pollution. The engine operates smoothly, thanks to a well-designed intake and exhaust system that optimizes fuel and air flow.

Another significant characteristic of the PE-251 is its easy-start mechanism, which features a primer bulb and a precision-engineered recoil starter. This technology reduces the effort required for starting the machine, allowing users to get to work quickly. Additionally, the chainsaw incorporates an adjustable oil pump that allows for accurate lubrication of the chain, enhancing performance and prolonging the life of the saw.

Safety is a priority with the Dolmar PE-251, evident in its built-in safety features. The chainsaw includes a chain brake, which can be activated instantly to stop the chain in case of kickback, a common hazard during cutting tasks. Furthermore, the handle is ergonomically designed for a comfortable grip, providing better control and reducing the risk of accidents.

In conclusion, the Dolmar PE-251 is an excellent choice for users seeking a reliable, lightweight chainsaw with innovative features that enhance performance and safety. Whether for maintaining a garden, undertaking landscaping projects, or dealing with storm damage, this chainsaw delivers efficiency and ease of use, making it a valuable addition to any toolkit.