Specifications | Exmark VH3615KA, Vh3615ka, Vh4815ka specification

PART NO. 303508

LOCATION: On Top Rear Right Hand

Surface of Mower Deck

PART NO. 403005

LOCATION: Front Corners of

Mower Deck

PART NO. 303102

LOCATION: Upper

Handle

PART NO. 513746	PART NO. 303293	PART NO. 513890
LOCATION: On Engine Blower	PART NO. 303293	LOCATION: On Top of
Housing Next to Muffler	LOCATION: On Top Right	Hydraulic Tank
	Side of Fuel Tank

2. SPECIFICATIONS

2.1 MODEL NUMBER:

Serial Nos. 220,000 & Higher: VH3615KA; VH4815KA

2.2ENGINE

2.2.1Engine Specifications: See your Engine Owner's Manual.

2.2.23600 RPM (No Load).

2.3FUEL SYSTEM

2.3.1Capacity: 5.0 gal.(18.9 L.)

2.3.2Type of Fuel: Regular unleaded gasoline, 87 octane or higher. In countries using the research method, it should be a 90 octane minimum.

2.3.3Fuel Filter: Replaceable in-line

2.3.4Fuel Shut-Off Valve: 1/4 turn

2.4SAFETY INTERLOCK SYSTEM

Operator must have transmission in neutral and blade clutch disengaged to start engine. Release of OPC levers will cause the engine to stop if hydro transmission is not in neutral and/or blade clutch is engaged.

2.5STEERING/BRAKE CONTROL:

Fingertip drive control levers provide independent speed control, braking and neutral to each drive wheel for moving forward or reverse, stopping and power turning.

2.6TRANSMISSION:

Twin Hydrostatic Drive

2.6.1Two Hydro Gear BDP-10L series variable displacement pumps independently coupled to two high efficiency Parker/Ross wheel drive motors.

- 7 -