Exmark VH3615KA, Vh3615ka, Vh4815ka manual Maintenance & Adjustments, Transporting

Page 22

4.3.8Blade Disengagement: Push forward and down completely on the engagement knob to disengage the blades (See Section 4.1.5).

4.4TRANSPORTING

WARNING

POTENTIAL HAZARD

Loading the mower onto a trailer without strong enough or properly supported ramps could be dangerous.

WHAT CAN HAPPEN

The ramps could collapse causing the unit to fall, which could cause injury.

HOW TO AVOID THE HAZARD

Use proper ramps that are secured to the truck or trailer.

Keep feet and legs out from under the unit when loading and unloading.

If necessary, use assistance when loading.

Use a heavy duty trailer to transport the machine. Engage neutral lock latches and block wheels. Securely fasten the machine to the trailer with straps, chains, cables or ropes. Use a safety chain and be sure that the trailer has all necessary lighting and marking as required by law.

5. MAINTENANCE & ADJUSTMENTS

WARNING

POTENTIAL HAZARD

If you leave the key in the ignition switch, someone could start the engine.

WHAT CAN HAPPEN

Accidental starting of the engine could seriously injure you or other bystanders.

HOW TO AVOID THE HAZARD

Remove the key from the ignition switch and pull the wire(s) off the spark plug(s) before you do any maintenance. Also push the wire(s) aside so it does not accidentally contact the spark plug(s).

WARNING

POTENTIAL HAZARD

The engine can become very hot.

WHAT CAN HAPPEN

Touching a hot engine can cause severe burns.

HOW TO AVOID THE HAZARD

Allow the engine to cool completely before service or making repairs around the engine area.

- 17 -

Image 22
Contents Page Potential Hazard Exmark Parts PLUS Program Operators Manual Assembly Instructions SafetySpecifications Maintenance & AdjustmentsSafety Alert Symbol SafetyYour Safety is Involved TrainingPotential Hazard Operation Maintenance and Storage Safety Signs Riding AttachmentsPage Specifications Wheel Drive System DimensionsTires Torque Requirements Assembly InstructionsUpper Handle Mounting HP Kawasaki Speed Control Throttle Cable HOOK-UP Hydro Control Linkage Swivel & Drive Linkage SwivelDrive Linkage to Drive Lever Operation Instructions Drive LEVER, Neutral Lock Latch OperationPre-Start Operating Instructions Potential Hazard Rotating blades under the mower deck are dangerous Maintenance & Adjustments TransportingPeriodic Maintenance Do not OverfillBlade Bolt Installation Must stopService Interval After First 250 hrs, then yearly thereafter Charge Pump Location Grease Lubrication Chart Fitting Initial Quantity Service Locations Pumps IntervalSpray Lubricant Chart Pivot PointAdjustments Potential Hazard Cutting Height Adjustment 1 to 4 1/4 Axle NO. of Spacers Number of 1/4 Blade Spacers PositionBlade Engagement Linkage Cutter Deck Belt Adjustment Blade Brake AdjustmentNeutral Safety Switch Adjustment Belt Guide LocationHydro Drive Linkage Adjustment Hydro Control LINK/SWIVEL AdjustmentDrive Lever and Latch in Neutral Position Mower Tracks to Left or Right Trouble ShootingBlades do not Stop When Disengaged Mower Cuts UnevenlyProblem Engine TroubleshootingEngine Troubleshooting Table Mower Deck Belt RoutingWiring Diagram Hydraulic Diagram Warranty Page Fold Along Appropriate Line See EXMARK’S Complete Line of Products for Turf Care