Ferris Industries DDSKAV23CE manual Mowing Height Adjustment, Mount Blade Caster Height Of Cut

MOWING HEIGHT ADJUSTMENT

The mowing height is determined by three factors: the mount position of the mower deck, the number of blade spacers above the spindle and the number of caster spacers above the caster arm.

Refer to the Height Of Cut chart to the right for the cor- rect settings to obtain the desired height of cut. Remember, the “Blade Spacers” and “Caster Spacers” columns refer to the number ABOVE the spindle and caster arm. See Figure 16.

Troubleshooting, Adjustment & Service

	Mount	Blade	Caster
Height Of Cut	Position	Spacers	Spacers
	(C, Fig. 16)	(B, Fig. 16)	(A, Fig. 16)
1-3/4”	U	1	3
2”	U	2	3
2-1/4”	U	3	3
2-1/2”	U	3	2
2-3/4”	L	4	2
3”	L	2	1
3-1/4”	L	3	1
3-1/2”	L	3	0
3-3/4”	L	4	0
4”	L	5	0

	C
A
B	B
A

Figure 16. Mowing Height Adjustment Points

A.Caster Spacers

B.Blade Spacers

C.Deck Mount Position (shown in “L”)

21