ASSEMBLY
ASSEMBLY
Read and follow the assembly and adjustment instructions for your mower. All fasteners are in the parts bag. Do not discard any parts or material until the unit is assembled.
WARNING: Before doing any assembly or mainte- nance to the mower, remove the wire from the spark plug.
NOTE: In this instruction book, left and right describe the loca- tion of a part with the operator on the seat.
NOTE: Torque is measured in foot pounds (metric N.m). This measurement describes how tight a nut or bolt must be. The torque is measured with a torque wrench.
TOOLS REQUIRED
Pliers (1)
Adjustable open end wrenches (2)
Blade type screwdriver (1)
Phillips screwdriver (1)
PARTS BAG − CONTENTS
The fasteners and other loose parts are shown below. The fasteners are shown full size. The quantity is shown in brackets ( ).
1x66 | 15x118 | 30x49 |
(1) Hex Bolt | (1) Flange Nut | Hair Pin |
1x45 | 14x79 | 20729 |
(2) Hex Bolt | (2) Wingnut | (1) Keys & Ring |
6x99 | 18x16 |
(2) Bolt | (2) Lockwasher |
17x195 Washer
F−98857 | 11 |