Husqvarna LZ7227TKOA Setup and Adjustments, Rops Assembly Roll Over Protection System, Tires

Page 15

SETUP AND ADJUSTMENTS

WARNING!

No settings or adjustments are to be made unless: Engine is stopped, key has been removed, park brake is on and bat- tery cable removed from battery.

4.Torque all 1/2” hardware to 80 ft./lbs. (110 N•m).

5.Install and tighten knobs against the side post.

Setup

Uncrate machine.

ROPS Assembly

(Roll Over Protection System)

ROPS Assembly Components

1 - Top Loop

1 - Left Side Post

1 - Right Side Post

1 - Hardware Bag

2 - 1/2” Latch Pins w/lanyard

2 - 1/2C x 3 1/4” Cap screws

6 - 1/2C Centerlock Nuts

4 - 1/2C x 4” Cap screws

2 - Knobs

(all hardware Grade 5).

1.Remove roll bar and parts bag from the box.

2.Install roll bar side posts.

a.Locate the LEFT and RIGHT side posts.

b.Slilde the left side post into the left side receiver on the frame, do the same on the right side.

c.Using 1/2C x 3 1/4 cap screws, two per post, align the holes in the side post with the frame receiver.

d.Install the 1/2C centerlock nuts finger tight to the side post bolts.

3.Install roll bar top loop.

a.Align the holes of the top loop with the left and right side posts.

b.Slide the latch pins thru the front hole on the left and right side to connect the top loop to the side posts and secure with the hairpin.

c.Using 1/2C x 3 1/4 cap scrws thru the rear hole on the left and right side.

d.Install the 1/2C centerlock nuts finger tight.

LATCH PIN

TOP LOOP

 

KNOB

1/2C X 3 1/4

 

CAPSCREW

 

 

1/2C CENTERLOCK

 

NUT

 

RIGHT SIDE

 

POST

LEFT SIDE

 

POST

1/2C CENTERLOCK

 

NUTS

1/2C X 4”

 

CAPSCREWS

 

Tires

 

Mount rear drive wheels using the lug nuts installed on the hubs.

Check the tire pressure in all four tires. All tires should be 15 psi.

15

Image 15
Contents Manual no REV. IR 09/08/04 Operators manualHusqvarna. All rights reserved Contents Introduction IntroductionGood Service Symbols and Decals Symbols and DecalsSafety Instructions Safety InstructionsGeneral Use Keep children away from the work area Do as follows Driving on SlopesChildren Maintenance8011-563 Important Information TransportCustomer Responsibilities Roll Over Protection SystemPresentation PresentationSetup and Adjustments Rops Assembly Roll Over Protection SystemTires Engine Oil AdjustmentsSeat Install Control ArmsFrom rotating tires Motion Control Linkage AdjustmentMower Deck Leveling Throttle Lever TensionPark Brake Adjustment Operating instructions Operating InstructionsFuel Shut Off Key SwitchHour Meter Pump Release ValvesMower blades MaintenanceSafety interlock system Cutter HousingsHardware Air filterHydraulic system Caster Wheels Pump beltLubrication Tire pressureTorque Specifications Maintenance Schedule Problem Trouble ShootingPage Wiring Diagrams Wiring Diagrams

LZ5225TKAA, LZ5225TKAA, LZ6123LTKOA, LZ6125TKAA, LZ6127TKOA, LZ7227TKOA, LZ6123LTKOA, LZ6127TKOA, LZ7227TKOA specifications

Husqvarna has long been recognized as a leading manufacturer of innovative outdoor power equipment, and their line of zero-turn mowers exemplifies their commitment to quality and performance. Among their extensive offerings, models like the LZ5225TKAA, LZ6123LTKOA, LZ6125TKAA, LZ6127TKOA, and LZ7227TKOA stand out, catering to both residential and commercial users.

The LZ5225TKAA is designed for small to medium-sized lawns. It features a powerful engine that delivers a robust cutting performance while maintaining fuel efficiency. Its compact design allows for easy maneuverability in tight spaces, making it an ideal choice for homeowners who need to navigate around trees and flower beds. The mower's cutting deck is engineered for precision, providing an even cut across various grass types.

Moving up in the lineup, the LZ6123LTKOA and LZ6125TKAA offer enhanced features suitable for larger properties or professional landscapers. Both models come equipped with advanced cutting technology that ensures a clean and uniform finish. The LZ6125TKAA is particularly notable for its generous cutting width, which drastically reduces mowing time, maximizing productivity.

The LZ6127TKOA is designed for heavy-duty tasks, boasting a more powerful engine and larger cutting deck. This model is well-suited for commercial applications where performance and durability are paramount. It features a user-friendly control system that allows operators to adjust settings easily while on the move, enhancing the mowing experience.

For those who require the utmost in performance, the LZ7227TKOA is the top-of-the-line model. With an impressive combination of power, speed, and cutting efficiency, it is engineered for maximum output in challenging conditions. This model incorporates advanced vibration dampening technologies to minimize user fatigue, making it ideal for long working hours.

Each of these models is equipped with Husqvarna's proprietary technologies, including robust steel cutting decks and high-performance engines that are built to handle demanding tasks. Additionally, the mowers are compatible with a range of attachments, allowing for versatile year-round use.

In conclusion, the Husqvarna LZ series offers a variety of zero-turn mowers that combine cutting-edge technology, durability, and user-friendly features. Whether you are a homeowner or a professional landscaper, there is a Husqvarna model tailored to meet your specific mowing needs, ensuring a well-manicured lawn with every use.