Husqvarna 968999272 manual Key Switch, Hour Meter, Pump Release Valves, Fuel Shut Off, Tracking

Page 20

OPERATING INSTRUCTIONS

Key Switch

Key switch is located on the console. Used to start the machine. NOTE: Do not run the starter for more than 5 seconds at a time. If the engine will not start, wait about 10 seconds before trying again. FIG - 8

Hour Meter

The hour meter displays the total operating time and reminds of service intervals.

The meter will indicate “CHG OIL” for engine oil and “SVC” for general service at preset intervals. The hour meter will reset itself at predetermined times.

Engine “CHG” will come on after the first ten (10) hours of operation, and will stay on for one (1) hour of operation before it will reset itself. It will come on every 99 hours thereafter, and stay on for five (5) hours of operation before resetting.

Mower “SVC” message will come on every 50 hours to remind to lubricate the unit, check blades and fasteners, etc. This message will stay on for two (2) hours of operation before resetting.

Pump Release Valves

Pump release valves located at the right front cor- ner of the pumps. Used to release the system so the machine may be moved by hand when not running. Tilt seat forward to gain access to the pumps. Use a 5/8” wrench to open valve. NOTE: Only rotate valve 1/4 turn to release system.

Choke

Throttle

Key Switch

Blade

Engagement

Hour Meter

FIG - 8

Fuel Shut Off

Fuel shut off valve is located at the right rear of the seat. The valve has three positions a right tank, left tank and center is the off position. FIG - 9.

Tracking

The tracking knob is located in front of the left con- trol lever. Rotating this knob allows fine tuning ad- justments so that the machine tracks straight with the drive levers in the full forward position.

Rotate the knob clockwise (as viewed from the operating position) to increase the speed or coun- terclockwise to decrease the speed on the left control lever. Example: If control levers are full for- ward and the unit turns to the right, turn the track- ing knob counterclockwise to decrease the speed on the left control lever.

Fuel Valve

FIG - 9

20

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Operators manual Manual no REV. IR 09/08/04Husqvarna. All rights reserved Contents Introduction IntroductionGood Service Symbols and Decals Symbols and DecalsGeneral Use Safety InstructionsSafety Instructions Keep children away from the work area Driving on Slopes Do as followsMaintenance Children8011-563 Transport Important InformationRoll Over Protection System Customer ResponsibilitiesPresentation PresentationTires Setup and AdjustmentsRops Assembly Roll Over Protection System Adjustments Seat InstallControl Arms Engine OilMotion Control Linkage Adjustment Mower Deck LevelingThrottle Lever Tension From rotating tiresPark Brake Adjustment Operating Instructions Operating instructionsKey Switch Hour MeterPump Release Valves Fuel Shut OffMaintenance Safety interlock systemCutter Housings Mower bladesHydraulic system HardwareAir filter Pump belt LubricationTire pressure Caster WheelsTorque Specifications Maintenance Schedule Trouble Shooting ProblemPage Wiring Diagrams Wiring Diagrams

LZ5225TKAA, LZ5225TKAA, LZ6123LTKOA, LZ6125TKAA, LZ6127TKOA, LZ7227TKOA, LZ6123LTKOA, LZ6127TKOA, LZ7227TKOA specifications

Husqvarna has long been recognized as a leading manufacturer of innovative outdoor power equipment, and their line of zero-turn mowers exemplifies their commitment to quality and performance. Among their extensive offerings, models like the LZ5225TKAA, LZ6123LTKOA, LZ6125TKAA, LZ6127TKOA, and LZ7227TKOA stand out, catering to both residential and commercial users.

The LZ5225TKAA is designed for small to medium-sized lawns. It features a powerful engine that delivers a robust cutting performance while maintaining fuel efficiency. Its compact design allows for easy maneuverability in tight spaces, making it an ideal choice for homeowners who need to navigate around trees and flower beds. The mower's cutting deck is engineered for precision, providing an even cut across various grass types.

Moving up in the lineup, the LZ6123LTKOA and LZ6125TKAA offer enhanced features suitable for larger properties or professional landscapers. Both models come equipped with advanced cutting technology that ensures a clean and uniform finish. The LZ6125TKAA is particularly notable for its generous cutting width, which drastically reduces mowing time, maximizing productivity.

The LZ6127TKOA is designed for heavy-duty tasks, boasting a more powerful engine and larger cutting deck. This model is well-suited for commercial applications where performance and durability are paramount. It features a user-friendly control system that allows operators to adjust settings easily while on the move, enhancing the mowing experience.

For those who require the utmost in performance, the LZ7227TKOA is the top-of-the-line model. With an impressive combination of power, speed, and cutting efficiency, it is engineered for maximum output in challenging conditions. This model incorporates advanced vibration dampening technologies to minimize user fatigue, making it ideal for long working hours.

Each of these models is equipped with Husqvarna's proprietary technologies, including robust steel cutting decks and high-performance engines that are built to handle demanding tasks. Additionally, the mowers are compatible with a range of attachments, allowing for versatile year-round use.

In conclusion, the Husqvarna LZ series offers a variety of zero-turn mowers that combine cutting-edge technology, durability, and user-friendly features. Whether you are a homeowner or a professional landscaper, there is a Husqvarna model tailored to meet your specific mowing needs, ensuring a well-manicured lawn with every use.
Top Page Image Contents