Husqvarna LZ5225TKAA, 968999272, 968999271, 968999269, 968999270, 968999268 Park Brake Adjustment

Page 18

SETUP AND ADJUSTMENTS

Park Brake Adjustment

When the park brake is on, the spring should measure 2 3/4” to2 7/8” and have a 1/4”-3/8” gap between the brake yoke and the washer on the lower brake rod.

If the spring needs adjusting follow these steps:

1.Apply the park brake.

2.Keep the lower brake rod from turning using a 9/16” wrench on the double nuts.

3.Turn the 3/8F nut at the the end of the spring the proper direction to achieve the correct measurement (2 3/4” - 2 7/8”).

4.Repeat on otherside if necessary.

If the 1/4” gap is not adjusted follow these step:

1.Place the park brake in the off position.

2.Loosen the 3/8F nut holding the yoke and re- move the clevis pin.

3.Turn the yoke clockwise to increase the gap.

4.Reinstall the yoke to the brake lever using the clevis pin and tighten the 3/8F nut to the yoke.

5.With the park brake on check your gap on both sides.

6.If necessary repeat the above steps.

If each side requires a different gap adjustment.

1.Place the park brake on.

2.Loosen the 3/8F nut next to the trunion.

3.Turn the brake rod clockwise to increase the gap.

4.Retighten the 3/8F nut to the trunion.

5.Repeat on the otherside if necessary.

Park Brake Lever

 

 

Yoke

 

Upper Brake Rod

 

3/8F

Brake Bellcrank

 

 

 

Nut

3/8F

 

 

 

 

Nut

 

 

1/4”-3/8”

Trunion

 

Gap

Clevis

 

 

Pin

 

 

3/8F

 

 

Nut

 

Spring

3/8F Nut

 

 

Brake Yoke

(Double Nuts)

Lower

 

 

Brake Rod

 

 

FIG - 6

 

 

18

Image 18
Contents Operators manual Manual no REV. IR 09/08/04Husqvarna. All rights reserved Contents Introduction IntroductionGood Service Symbols and Decals Symbols and DecalsSafety Instructions Safety InstructionsGeneral Use Keep children away from the work area Driving on Slopes Do as followsMaintenance Children8011-563 Transport Important InformationRoll Over Protection System Customer ResponsibilitiesPresentation PresentationSetup and Adjustments Rops Assembly Roll Over Protection SystemTires Control Arms AdjustmentsSeat Install Engine OilThrottle Lever Tension Motion Control Linkage AdjustmentMower Deck Leveling From rotating tiresPark Brake Adjustment Operating Instructions Operating instructionsPump Release Valves Key SwitchHour Meter Fuel Shut OffCutter Housings MaintenanceSafety interlock system Mower bladesHardware Air filterHydraulic system Tire pressure Pump beltLubrication Caster WheelsTorque Specifications Maintenance Schedule Trouble Shooting ProblemPage Wiring Diagrams Wiring Diagrams

LZ5225TKAA, LZ5225TKAA, LZ6123LTKOA, LZ6125TKAA, LZ6127TKOA, LZ7227TKOA, LZ6123LTKOA, LZ6127TKOA, LZ7227TKOA specifications

Husqvarna has long been recognized as a leading manufacturer of innovative outdoor power equipment, and their line of zero-turn mowers exemplifies their commitment to quality and performance. Among their extensive offerings, models like the LZ5225TKAA, LZ6123LTKOA, LZ6125TKAA, LZ6127TKOA, and LZ7227TKOA stand out, catering to both residential and commercial users.

The LZ5225TKAA is designed for small to medium-sized lawns. It features a powerful engine that delivers a robust cutting performance while maintaining fuel efficiency. Its compact design allows for easy maneuverability in tight spaces, making it an ideal choice for homeowners who need to navigate around trees and flower beds. The mower's cutting deck is engineered for precision, providing an even cut across various grass types.

Moving up in the lineup, the LZ6123LTKOA and LZ6125TKAA offer enhanced features suitable for larger properties or professional landscapers. Both models come equipped with advanced cutting technology that ensures a clean and uniform finish. The LZ6125TKAA is particularly notable for its generous cutting width, which drastically reduces mowing time, maximizing productivity.

The LZ6127TKOA is designed for heavy-duty tasks, boasting a more powerful engine and larger cutting deck. This model is well-suited for commercial applications where performance and durability are paramount. It features a user-friendly control system that allows operators to adjust settings easily while on the move, enhancing the mowing experience.

For those who require the utmost in performance, the LZ7227TKOA is the top-of-the-line model. With an impressive combination of power, speed, and cutting efficiency, it is engineered for maximum output in challenging conditions. This model incorporates advanced vibration dampening technologies to minimize user fatigue, making it ideal for long working hours.

Each of these models is equipped with Husqvarna's proprietary technologies, including robust steel cutting decks and high-performance engines that are built to handle demanding tasks. Additionally, the mowers are compatible with a range of attachments, allowing for versatile year-round use.

In conclusion, the Husqvarna LZ series offers a variety of zero-turn mowers that combine cutting-edge technology, durability, and user-friendly features. Whether you are a homeowner or a professional landscaper, there is a Husqvarna model tailored to meet your specific mowing needs, ensuring a well-manicured lawn with every use.