Husqvarna 917.27909 Before Starting the Engine, To Operate on Hills, Check Engine OIL Level

Page 14

OPERATION

TO OPERATE ON HILLS

I& with slopes greater than 15 °and do not CAUTION: Do not drive up or down hills I drive across any slope.

Choose the slowest speed before starting up or down hills,

Avoid stopping or changing speed on hills.

If slowing is necessary, move throttle control lever to slower position,

If stopping is absolutely necessary, push clutch/brake pedal quickly to brake position and engage parking brake,

Move gearshift lever to 1st gear and range shift lever to low (L) position. Be sure you have allowed room for tractor to roll slightly as you restart movement,

To restart movement, slowly release parking brake and clutch/brake pedal,

Make all turns slowly.

TO TRANSPORT

•Raise attachment liftto highest position with attachment lift control,

•When pushing or towing your tractor, be sure gearshift lever is in neutral (N) position,

•Do not push or tow tractor at more than five (5) MPH.

NOTE: To protect hood from damage when transporting your tractor on a truck or a trailer, be sure hood is closed and secured to tractor. Use an appropriate means of tying hood to tractor (rope, cord, etc.),

TOWING CARTS AND OTHER ATTACH-

MENTS

Tow only the attachments that are recommended by and comply with specifications of the manufacturer of your trac- tor. Use common sense when towing,Too heavy of a load, while on a slope, is dangerous. Tires can lose traction with the ground and cause you to lose control of your tractor,

BEFORE STARTING THE ENGINE

CHECK ENGINE OIL LEVEL

The engine in your tractor has been shipped, from the factory, already filled with summer weight oil,

•Check engine oil with tractor on level ground,

•Remove oil fill cap/dipstick and wipe clean, reinsert the dipstick and screw cap tight, wait for a few seconds, remove and read oil level, If necessary, add oil until "FULl" mark on dipstick is reached, Do not overfill.

•For cold weather operation you should change oil for easier starting (See "OIL VISCOSITY CHART" in the Maintenance section of this manual).

•To change engine oil, see the Maintenance section in this manual,

ADD GASOLINE

•Fill fuel tank to bottom of filler neck. Do not overfill.

Use fresh, clean, regular unleaded gasoline with a minimum of 87 octane, (Use of leaded gasoline will increase carbon and lead oxide deposits and reduce valve life). Do not mix oil with gasoline. Purchase fuel in quantities that can be used within 30 days to assure fuel freshness.

4Bkfuel. Do not store, spill or use gasoline

I _ CAUTION:anopenWipenearflameoff. any spilled oil or

IMPORTANT: WHEN OPERATING IN TEMPERATURES

BELOW32°F(0°C), USE FRESH, CLEAN WINTER GRADE GASOLINE TO HELP INSURE GOOD COLD WEATHER STARTING.

CAUTION: Alcohol blended fuels (called gasohol or using ethanol or methanol) can at- tract moisture which leads to separation and formation of acids during storage. Acidic gas can damage the fuel system of an engine while in storage. To avoid engine problems, the fuel system should be emptied before storage of 30 days or longer. Drain the gas tank, start the engine and let it run until the fuel lines and carburetor are empty. Use fresh fuel next season. See Storage Instructions for additional information. Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur.

TO START ENGINE (See Fig. 7)

When starting the engine for the first time or if the engine has run out of fuel, it will take extra cranking time to move fuel from the tank to the engine.

•Sit on seat in operating position, depress clutch/brake pedal and set parking brake.

•Place gear shift lever in neutral (N) position,

•Move attachment clutch to "DISENGAGED" position.

•Move throttle control to fast position

•Pull choke control out for a cold engine start attempt, For a warm engine start attempt the choke control may not be needed.

NOTE: Before starting, read the warm and cold starting procedures below,

•Insert key into ignition and turn key clockwise to "START" position and release key as soon as engine starts, Do not run starter continuously for more than fifteen seconds per minute, If the engine does not start after several attempts, push choke control in, wait a few minutes and try again, If engine still does not start, pull the choke control out and retry,

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Husqvarna II. Slope Operation Safe Operation Practices for Ride-On MowersGeneral Operation III. Children ServiceSafe Operation Practices IV. Towi NGContents Unassembled Parts Before Removing Tractor from Skid Tools Required for AssemblyCarton Unpack CartonInstall Seat See Fig Assemble Gauge Wheels to Mower Deck SeeInstall Mower and Drive Belt Sees Engage slowlyCheck Deck Levelness ChecklistChecktire Pressure Check for Proper Position of ALL BeltsOperation LOW Choke FastKnow Your Tractor HOW to USE Your Tractor To Operate Mower See Fig To Adjust Gauge Wheels See FigUsing the Reverse Operation System Reverse Operation System ROSTowing Carts and Other Attach Ments Before Starting the EngineTo Operate on Hills Check Engine OIL LevelMowing Tips General Recommendations MaintenanceLubrication Chart Before Each USETo Sharpen Blade See Fig TractorBlade Removal See Fig Belts BatteryEngine Transaxle CoolingCleaning To Level Mower Housing Service and AdjustmentsTo Install Mower To Remove Mower See FigService AdjustmentsMower Drive Belt Removal Mower Drive Belt InstallationTo Replace Mower Drive Belt Belt RoutingTo Replace Motion Drive Belt To Check and Adjust BrakeTo Adjust Attachment Clutch With Parkingbrake Engaged To Start Engine with a Weak Battery See Fig Transmission REMOVAL/REPLACEMENTTo Adjust Steering Wheel ALIGN- Ment Front Wheel TOE-IN/CAMBERTo Adjust Carburetor To Adjust Throttle Control CableTo Adjust Choke Control To Replace Headlight BulbCylinders Fuel SystemEngine OIL Points Cause CorrectionProblem Cause Correction EngagedSchematic Solenoid Optional Fuel LineElectrical KEY Part Description Chassis and Enclosures Repair Parts Ground Drive Repair Parts Steering Assembly Repair Parts Engine Spark Arrester KITKEY PartSeat Assembly KEY Part DescriptionPart KEY Description DecalsKEY Lift Assembly 11/32 x 1-1/2 x 10 Ga Mower Deck 183 Suggested Guide for Sighting Slopes for Safe Operation Only Ride UP and Down Hill Not Across Hill Degrees MAXWarranty Statement HusqvarnaHusqvarna

917.27909 specifications

The Husqvarna 917.27909 is a formidable riding lawn mower, designed to offer both power and versatility for homeowners who prioritize efficiency in lawn care. With a robust construction and user-friendly features, this model has garnered attention for its ability to tackle various landscaping tasks.

One of the standout features of the Husqvarna 917.27909 is its powerful engine. Equipped with a 24 horsepower Briggs & Stratton engine, it delivers reliable performance that can handle larger mowing areas without faltering. This engine offers a combination of durability and smooth operation, ensuring that even challenging terrains can be managed with ease.

The cutting deck of the Husqvarna 917.27909 measures 48 inches, allowing for an impressive cutting swath. This wide deck reduces mowing time, making it efficient for expansive yards. The deck is made of high-quality materials that resist wear and tear, and it features an adjustable cutting height to cater to varying grass lengths and user preferences.

An innovative aspect of this mower is its cutting system. The model incorporates a three-blade system that ensures a clean and even cut. This is particularly beneficial for maintaining a healthy lawn, as it prevents grass from being torn and provides a polished finish to the landscape.

User comfort is another key characteristic of the Husqvarna 917.27909. The mower is designed with an ergonomic seat and convenient controls that place essential functions at the operator's fingertips. Additionally, the steering wheel is designed for ease of use, enabling smooth maneuverability around trees and flower beds.

Technologically, the Husqvarna 917.27909 features a hydrostatic transmission, which allows for seamless speed adjustments without the need for manual gear changes. This technology enhances the overall mowing experience by providing intuitive control and the ability to navigate effortlessly across different surfaces.

For maintenance, the model includes practical features such as an easy-access deck wash port. This allows users to connect their garden hose for quick cleaning of the mowing deck, reducing the time spent on upkeep.

In summary, the Husqvarna 917.27909 is a well-engineered riding lawn mower that marries power and convenience. With its strong engine, efficient cutting deck, comfortable user experience, and innovative technology, it stands as a reliable choice for anyone looking to maintain their lawn with minimal effort and maximum results.
Top Page Image Contents