Husqvarna 41, 36 manuel dutilisation Maintenance, Tools and materials, Centrifugal cleaning

Page 14

Maintenance

Tools and materials

The tools and material shown are absolutely essential for routine everyday safe operation and maintenance of a chain saw. T-wrench (A) – This type of wrench or its equivalent should always be carried with your chain saw. The wrench is needed to adjust chain tension which must be correctly adjusted for safer cutting. Small screwdriver (B) – Used for carburetor adjustment.

Files - You need one round file (C) with file gauge (D) to sharpen the cutting teeth of the chain and one flat file (E) and depth gauge tool (F) for filing the depth gauge.

During winter time, powder snow and cold weather can cause running problems, such as:

●Too low engine temperature.

●Icing on the air filter and carburetor.

Air filter “MEDIUM MESH” must be used,

I

I

I

Centrifugal cleaning

Centrifugal cleaning means the following:

All air to the carburetor is carried through the starter. Dirt and dust is centrifuged away by the cooling fan.

IMPORTANT! In order to keep the function of the centrifugal cleaning, a continous maintenance and care must be made.

oClean the air intake to the starter, the fan wings of the flywheel, the space around the flywheel, inlet pipe and

carburetor space.

r

Page 13 Page 15
Image 14
Page 13 Page 15
Contents 36/41 Page CRead the Operator’s Manual carefully Beforeusing your new chain sawIndex Serial No-PLATEIID 1. Kickback Safety Precautions Safety PrecautionsAnsi B 175.1-1985 Appendix D Safety Precautions Other Safety PrecautionsWhat is what on the saw TechnicalspecificationmMountingguide bar and chain \ \Two-stroke oil Fuelmixand chainoilFuel Chain oilStartand stop Controland maintenanceof the chain brake ChainbrakeMaintenanceand function Changing a broken or worn starter cord IStarter device assemblyStarterdevice Tensioning the recoil springChain maintenance ’Jl Chainmaintenance1111 Tools and materials MaintenanceCentrifugal cleaning Monthly maintenance Daily maintenanceWeekly maintenance IllCarburetor Low speed needle L Final setting of the idling speed TCorrectly adjusted carburetor High speed needle HFirst aid kit Eaui~mentneededClothing Forestry toolsLoss of control resulting in injury Generalworking instructionGeneral Felling cut Basic rules for felling treesNotching ~Felling cut, trunk diameter less than guideCross cuttinglbucking LimbingLimbing thick branches Cross cutting logs, pressure on topGeneralworkina instruction Commonsense
Top Page Image Contents