Husqvarna 36, 41 manuel dutilisation What is what on the saw, Technicalspecificationm

What is what on the saw

o5

	2	o 3	~	10
o			11	0
			o

o 1

I

1, Cylinder cover, 2, Front handle.

3.Front hand guard. 4, Starter.

5, Chain oil tank.

6.Starter handle.

7.Adjustment screws, carburetor.

8.Choke/Throttle latch

9.Stop switch. Switches the ignition on and off. 10, Rear handle.

11, Fuel tank.

12, Sprocket nose.

13.Saw chain.

14.Guide bar.

15.Muffler,

16.Chain catcher. Catches the chain if the chain jumps or breaks.

17, Clutch cover with a built-in chain brake.

18, Chain guard. Protects the right hand if the chain breaks or jumps.

19, Throttle trigger.

20, Throttle trigger lockout, Prevents unintentional throttle movement.

—			—
Technicalspecificationm
Engine		36	41
Displacement	cu.inicc	2.2136	2.4/40
Bore	mm	38	40
Stroke	mm	32	32
Idling Speed	rpm	3000	3000
Recommended max speed unloaded	rpm	13.000	13.000
Ignitionsystem	Phelon	CD	CD
Manufacturer/type of ignition system
Spark Plug	Champion	RCJ7Y	RCJ7Y
Electrode Gap	inlmm	0.02/0,5	0.02/0,5
Timing	Fixed; Nonadjustable

Fuel and lubricationsystem

Manufacturer/type of carburetor Fuel tank volume

Oil pump capacity at 8000 rpm Oil tank volume

Oil pump type

Walbro	WT 239	WT 239
pint/litre	0.73/0,40	0.73/0,40
cc/rein	6-8	6-8
pint/litre	0.36/0,20	0.36/0,20
	automatic	automatic

Weight

With guide bar and chain, 16”lbs/kilos 12.1/5,5 12.1/5,5

Chain and guidebar

Standard bar length	inlcm	16/41	16/41
Recommended bar lengths	inlcm	15/38	15/38
		16/41	16/41
		18146	18146
Chain speed at max power	m/see, t	16.3, 7t	16.3, 7t
Pitch	in	3/8	3/8
		.325	.325
Thickness of driving links	inlmm	.050/1,3	,050/1,3
		.058/1,5	.058/1,5

5