Husqvarna 355RX, 355FXT, 355FRM Fueling, Fuel safety, Transport and storage, Long-term storage

Page 20

FUEL HANDLING

Fueling

!

WARNING! Taking the following

precautions, will lessen the risk of fire:

Do not smoke and do not place any hot objects in the vicinity of fuel.

Always stop the engine and let it cool for a few minutes before refuelling.

When refuelling, open the fuel cap slowly so that any excess pressure is released gently.

Tighten the fuel cap carefully after refuelling.

Always move the machine away from the refuelling area before starting.

Clean the area around the fuel cap. Clean the fuel and chain oil tanks regularly. The fuel filter must be replaced at least once a year. Contamination in the tanks causes malfunction. Make sure the fuel is well mixed by shaking the container before refuelling.The capacities of the chain oil tank and fuel tank are carefully matched. You should therefore always fill the chain oil tank and fuel tank at the same time.

WARNING! Fuel and fuel vapor are highly ! flammable. Take care when handling fuel

and chain oil. Be aware of the risks of fire, explosion and those associated with inhalation.

Fuel safety

•Never refuel the machine while the engine is running.

•Make sure there is plenty of ventilation when refuelling or mixing fuel (gasoline and 2-stroke oil).

•Move the machine at least 10 ft (3 m) from the refuelling point before starting it.

•Never start the machine:

1If you have spilled fuel or chain oil on the machine. Wipe off the spillage and allow remaining fuel to evaporate.

2If you have spilled fuel on yourself or your clothes, change your clothes. Wash any part of your body that has come in contact with fuel. Use soap and water.

3If the machine is leaking fuel. Check regularly for leaks from the fuel cap and fuel lines.

WARNING! Never use a machine with ! visible damage to the spark plug guard

and ignition cable. A risk of sparking arises, which can cause a fire.

Transport and storage

•Always store the chain saw and fuel so that there is no risk of leakages or fumes coming into contact with sparks or naked flames from electrical equipment, electric motors, relays/switches, boilers and the like.

•Always store fuel in an approved container designed for that purpose.

•For longer periods of storage or for transport of the chain saw, the fuel and chain oil tanks should be emptied. Ask where you can dispose of waste fuel and chain oil at your local gas station.

•Ensure the machine is cleaned and that a complete service is carried out before long-term storage.

•The bar guard must always be fitted to the cutting attachment when the machine is being transported or in storage, in order to prevent accident contact with the sharp chain. Even a non-moving chain can cause serious cuts to yourself or persons you bump into with an exposed chain.

•Remove the spark plug cap from the spark plug. Activate the chain brake.

Long-term storage

Empty the fuel/oil tanks in a well ventilated area. Store the fuel in approved cans in a safe place. Fit the bar guard. Clean the machine. See instructions under the heading Maintenance schedule.

20 – English

115 10 82-96 Rev.1 2008-03-26

Page 19 Page 21
Image 20
Page 19 Page 21
Contents 435 435e 440e KEY to Symbols Symbols on the machineSymbols in the operator’s manual You will find the following labels on your chain sawContents Introduction Dear customerWhat is WHAT? What is what on the chain saw?General Safety Precautions Before using a new chain sawMachine′s safety equipment Always use common sensePersonal protective equipment Chain brake and front hand guardGeneral Safety Precautions Throttle lockout Chain catcherStop switch Right hand guardVibration damping system MufflerCutting equipment designed to reduce kickback Cutting equipmentGeneral rules Sharpening your chain and adjusting depth gauge setting General information on sharpening cutting teethTensioning the chain 435 435e, 440eLubricating cutting equipment Which could lead to serious, even fatal injuries Chain oilFilling with chain oil Checking chain lubricationChecking wear on cutting equipment Chain drive sprocketNeedle bearing lubrication Assembly Fitting the bar and chain435 435e, 440eAssembly Fuel Handling FuelFuel safety FuelingTransport and storage Long-term storageStarting Starting and StoppingStarting and stopping Stopping Basic safety rules Working TechniquesBefore use General working instructionsGeneral rules Basic cutting technique TermsTree felling technique LimbingLog is supported at one end. There is a high risk Safe distanceDirectional cuts Felling directionClearing the trunk and preparing your retreat Felling cut Freeing a tree that has fallen badly How to avoid kickbackWhat is kickback? Cutting the trunk into logs General MaintenanceCarburetor adjustment Checking the inertia brake release Muffler Tensioning the recoil spring StarterReplacing the starter cord Air filter Replacing the return and drive springsFitting the starter Recoil spring aSpark plug Lubricating the bar tip sprocketNeedle bearing lubrication Cooling systemWinter use Air Injection centrifugal cleaningTemperature -5C 23F or colder Maintenance schedule Daily maintenance Weekly maintenance Monthly maintenanceTechnical Data Technical dataBar and chain combinations Saw chain filing and file gaugesYour Warranty Rights and Obligations What is not Covered American Standard Safety Precautions Safety precautions for chain saw usersKickback safety precautions Other safety precautionsAclaracion DE LOS Simbolos Símbolos en la máquinaSímbolos en el manual de instrucciones Etiquetas que se encuentran en la motosierraIndice ÍndiceIntroduccion Apreciado cliente¿QUE ES QUE? ¿Qué es qué en la motosierra?Importante Instrucciones Generales DE SeguridadMedidas a tomar antes de utilizar una motosierra nueva Emplee siempre el sentido común Equipo de protección personalEquipo de seguridad de la máquina Freno de cadena con protección contra reculadasInstrucciones Generales DE Seguridad Fiador del acelerador Captor de cadenaProtección de la mano derecha Sistema amortiguador de vibracionesBotón de parada SilenciadorEquipo de corte Reglas básicasEquipo de corte reductor de reculadas EspadaGeneralidades sobre el afilado de los dientes cortantes Generalidades sobre el ajuste de la profundidad de corte Tensado de la cadena Control de la lubricación de la cadena Lubricación del equipo de corteRepostaje de aceite para cadena de motosierra Control del desgaste del equipo de corte Piñón de arrastre de la cadenaLubricación del cojinete de agujas Montaje Montaje de la espada y la cadena¡ATENCION! Para manipular la cadena Deben utilizarse guantes protectoresMontaje del apoyo de corteza Manipulacion DEL Combustible CarburanteRepostaje Seguridad en el uso del combustibleTransporte y almacenamiento Almacenamiento prolongadoArranque Arranque Y ParadaArranque y parada Parada Tecnica DE Trabajo Antes de utilizar la máquinaInstrucciones generales de trabajo Reglas básicas de seguridadReglas básicas Técnica básica de corte DesignacionesTécnica de tala DesramadoEl tronco está apoyado en un extremo. Gran riesgo de Distancia de seguridadCorte de indicación Dirección de derriboCorte de ramas bajas y camino de retirada Corte de derribo ¿Qué es la reculada? Medidas preventivas de las reculadasTratamiento de una tala fallida Tronzado del tronco Ajuste del carburador MantenimientoGeneralidades Control de la función de inercia Silenciador Tensado del muelle de retorno Mecanismo de arranqueCambio del cordón de arranque Filtro de aire Cambio del muelle de retorno y el muelle de arrastreMontaje del mecanismo de arranque Muelle de retorno aBujía Engrase del cabezal de rueda de la espadaLubricación del cojinete de agujas Sistema refrigeranteTemperaturas de -5C 23F o inferiores Depuración centrífuga Air InjectionUtilización en invierno Programa de mantenimiento Datos Tecnicos Datos técnicosCombinaciones de espada y cadena Afilado y calibres de afilado de la cadena de sierraSUS Derechos Y Obligaciones DE Garantia LO QUE no Abarca LA Garantia Precauciones DE Seguridad DE LA Norma Americana Precauciones de seguridad para usuarios de motosierrasPrecauciones de seguridad en reculadas Otras precauciones de seguridadEnglish 115 10 82-96 Rev.1 Precauciones DE Seguridad DE LA Norma Americana 115 10 82-96 Rev.1 ´z+S=¶5Z¨ 115 10 82-96 Rev.1 1151082-96
Related manuals
Manual 44 pages 52.01 Kb
Top Page Image Contents