Husqvarna RZ3019 BF/966582101, RZ3016 CA/966612302 Safety Instructions, General Operation

Page 9

SAFETY

Safety Instructions

These instructions are for your safety. Read them carefully.

WARNING!

THIS CUTTING MACHINE IS CAPABLE

OF AMPUTATING HANDS AND FEET

AND THROWING OBJECTS. FAILURE

TO OBSERVE THE FOLLOWING

SAFETY INSTRUCTIONS COULD

RESULT IN SERIOUS INJURY OR

DEATH.

General Operation

Read, understand, and follow all instructions on the machine and in the manual before starting.

It is recommended that someone be aware that you are mowing and can provide help in case of injury or accident.

Do not put hands or feet near rotating parts or under the machine. Keep clear of the discharge opening at all times.

Only allow responsible adults, who are familiar with the instructions, to operate the machine.

Clear the area of objects such as rocks, toys, wire, etc., which could be picked up and thrown by the blades.

Be sure the area is clear of bystanders before operating. Stop machine if anyone enters the area.

Never carry passengers. The machine is only intended for use by one person.

Do not mow in reverse unless absolutely necessary. Always look down and behind before and while backing.

Never direct discharged material toward anyone. Avoid discharging material against a wall or obstruction. Material may ricochet back toward the operator. Stop the blades when crossing gravel surfaces.

Do not operate machine without the entire grass catcher, discharge guard, or other safety devices in place and working

Slow down before turning.

Never leave a running machine unattended. Always turn off blades, set parking brake, stop engine, and remove keys before dismounting.

WARNING!

This symbol means that important safety instructions need to be emphasized. It concerns your safety.

8011-512

Read the operator’s manual before starting the machine

8011-513

Clear the area of objects before mowing

9

Image 9
Contents Operator Manual All rights reserved Contents Page Introduction Manufacturing Number Good ServiceXxxx xxxxxx xxxxx xxxx Xxxxxx xxxxxxxxx. xx xxxxxxxx Symbols and DecalsRemove key before Safety Safety InstructionsGeneral Operation Never take passengers Slope Operation Personal Safety EquipmentBe extra cautious when driving on slopes Safe Handling of Gasoline General Maintenance Risk of sparking Spark Arrestor TransportControl Locations ControlsSteering Control Levers Ignition Switch Parking BrakeThrottle Control Refueling Choke ControlMower Deck Lifting Lever Fuel Shut Off ValveTracking Always use the high position F to transportBypass Linkages Blade Control LeverOperation TrainingSteering Starting the Engine Before StartingPlace controls in neutral position Open the fuel valve To remove cables, reverse order Jumper cablesRunning Operating on Hills Mowing Tips Stopping the Engine Moving Machine By Hand Maintenance Schedule Maintenance100 300 Year Battery Cleaning battery and terminalsAlways use protective glasses when handling the battery Tire Pressures Safety SystemBelts Deck BeltTo replace deck belt Cutting Blades EZT BeltLeveling Deck Adjusting the Mower DeckRemoval and installation of caster wheel CleaningUse protective glasses when cleaning and washing Caster WheelsGeneral LubricationFront Wheel Bearings Front Wheel MountDeck Spindle TransmissionProblem Cause TroubleshootingTroubleshooting Service StorageWinter Storage Schematic Technical Data Torque SpecificationsStandard Hardware Transmission 966582101 966612301 EngineOverall dimensions 966582101 966612301 EquipmentProductivity USA Requirements Conformity CertificatesDelivery Service Service JournalAfter 5-10 Hours Hour ServicePerform the 25-hour service At Least Once Each Year Page 115 383627 Rev E 2012-06-30