Marantz PMD680 manual EDL Playback, EDL Repeat Playback, Meaning of Mark Definition

PLAYBACK and EDITING

Meaning of Mark Definition

Mark put by REC/MARK key or AUTO MARK mode is defined as Point (default definition). Then you can change definition by above operation according to the sequence control purpose such as skip play or repeat play using defined mark.

The meaning of definition to the mark is as follows.

•Point (default); Mark without any sequence control definition. This is only useful for JUMP TO MARK access. In this case, mark is used like a bookmark in the recorded contents.

•Skip ; Sequence control "Skip".

•-a ; Sequence control "Repeat -a".

•-b ; Sequence control "Repeat -b".

Note

•Skip definition is effective only in EDL playback.

•Repeat -a, -b definitions are only effective in EDL Repeat playback mode.

•Mark defined as Repeat -a exits only one in a card. Mark defined as Repeat -b exits only one in a card as well. To define Repeat -a or Repeat -b, the mark defined last is effective, and former mark with Repeat definition changed to mark with Point definition.

•If Repeat -a is newly defined to a mark, the former mark with Repeat -a definition is change to a mark with Point definition (Mark with Repeat -b definition stay unchanged).

•Similarly, if Repeat -b is newly defined to a mark, the former mark with Repeat -b definition is change to a mark with Point definition (Mark with Repeat -a definition stay unchanged).

EDL Playback

To start EDL playback, presss PLAY/PAUSE key while pressing JUMP TO MARK key. EDL playback always starts from the top of the first track (track with the least track number in the card). In EDL play, when the mark with Skip definition is hit during EDL playback, jump to next mark. If next mark is also defined as Skip, then skip to next mark, until mark with definition other than Skip.

Skip can occur beyond the track, as well as within the track.

Top of the first track

JUMPJUMP

Recorded Contents

SKIP POINT SKIP SKIP POINT

Playback Part of Recorded Contents

Skipped Part of Recorded Contents

Note

If skip destination is not found (there is no POINT after the last SKIP) the EDL Playback stops st the last SKIP mark (the end of the track is assumed as the SKIP destination).

Display during EDL playback

During EDL playback, the play icon (3) blinks.

5	5	5
5		5		TRACK		TIME
	5
			-dB ∞�50 40 24		6 2 0

EDL Repeat Playback

Pressing REPEAT key while EDL playback, EDL playback starts. The unit plays back between the marks defined as Repeat -a and Repeat -b. The "REPEAT" icon turns on. Pressing REPEAT key again, the unit exits from EDL repeat, and resumes EDL playback without REPEAT. The "REPEAT " icon turns off.

REPEAT RENUMBER ERASE SILENT SKIP AUTO MARK

FORMATPRESET

Display during EDL Repeat playback

During EDL Repeat playback, the play icon (3) blinks. "REPEAT" icon turns on.

5	5	5
				REPEAT
5		5			TRACK		TIME
	5
		-dB ∞�50	40 24			6 2 0

Note

Skip definition to the mark is effective during EDL Repeat playback. Playback with skip is repeated between the marks with Repeat -a and Repeat -b definition.

		JUMP			JUMP
							Recorded Contents
Repeat -a	SKIP		POINT	SKIP	SKIP	POINT		Repeat -b
		Playback Part of Recorded Contents
		Skipped Part of Recorded Contents

20