Marantz PMD680 manual Connecting Digital Components, Other Connections, Remote control, Headphones

Page 7

SETTING UP

Connecting Digital

Components

The following illustrations show you how to connect digital audio components for recording.

To output digital audio signals to another audio component

Connect the source component’s digital input jacks to this unit’s DIGITAL OUT (coaxial) jack, and set the DIGITAL OUT switch ON.

DAT, etc.

DIGITAL IN

Other Connections

Remote control

Contact closure

switch

Notes

When digital output is not used, turn the DIGITAL OUT switch OFF.

Available Functions

The remote Pauses or Un-Pauses the unit when Play status.

Notes

•The unit must first be put in Play status manually before the remote connector will work.

Headphones

Connect headphones to the PHONES output to monitor the sound during recording and playback.

Use the HP/SPK VOLUME knob to control the volume of the headphones. The sound from the internal speaker is muted automatically when headphones are connected.

Image 7

Contents Introduction FeaturesPrecautions ForewordContents How to Use this ManualAC adaptor Ni-Cad Rechargeable Battery optionalBatteries and AC Adaptor Alkaline BatteriesPower Off Power On/OffSetting the Date and Time Power onEjecting the card Understanding PC CardsInserting the card Formatting the PC card OperationTo record from or output through a telephone wire Connecting MicrophonesConnecting Analog Components To output analog audio signals to another audio componentOther Connections Connecting Digital ComponentsRemote control HeadphonesData Display Charging BatteryLow Battery Warning and Auto Power Off During stop modeTo Illuminate the Display Panel KeylockDuring playback During RecordingMIC Attenuation Selection and Manipulation of Input SourceREC Level Silent Skip Recording Behavior SettingREC Mode PRE RECRecording Operation Preparation Basic OperationStop Audible Seek Un-audible Fast AccessRWD ReWinD Track Count Up/Down Track JumpRepeating the Entire card To cancelRepeat Play Repeating a TrackNext Track Jump Stop at the top of the next track Summary of Accessing BehaviorMarking Operation Marking and EDL PlaybackEditing Mark Access to the MarkDisplay during EDL playback EDL PlaybackEDL Repeat Playback Meaning of Mark DefinitionDeleting Mark Playback Control in EDL playback and in EDL Repeat playbackPause Display during pause while EDL PlaybackMark Inconsistency Initialization of EDLDisplaying Total Number of Marks Placed Display at initialization of EDLDisplay at Track Erase Operation Embed Track HandlingTrack Erase Renumbering Track NumberPreset Operation Presettable ParametersPresseting Parameters Example of Presetting Operation ID number setting operation Battery Type PresettingFile Format Presetting ID Number PresettingDisplay at Parameter Selection Menu File Management Error HandlingError Detection Capacity of Card and Recording TimeTroubleshooting General Digital audio systemInputs OutputsTop Panel Index of Parts, Controls, and DisplayFront Panel Front Pannel Top PannelRight Panel Left PanelDisplay REC