CONTROLS
Parking Brake
The parking brake is found on the left of the machine. Pull the lever backward to activate the brake and forward to release it.
IMPORTANT INFORMATION
The machine must stand absolutely still when applying the parking brake. Always set the parking brake before dismounting. Release the parking brake before moving the mower.
Blade Switch
To engage the mower deck, pull the blade switch knob out. The mower blades are disengaged when the knob is pressed down fully. Depending on fuel type, control console may vary.
Ignition Switch
The ignition key is placed on the control panel and is used to start and stop the engine. Depending on fuel type, control console may vary.
Turn the key clockwise to start the engine.
Parking brake
Blade switch
Ignition switch
22