maintenance
Cutting Blades
In order to attain the best mowing effect, it is important that the blades are well sharpened and not damaged.
Bent or cracked blades or blades with large nicks should be replaced.
Blades damaged from hitting obstacles that result in a breakdown should be replaced. The service workshop should decide whether the blade can be repaired/ground or must be replaced. Balance the blades after sharpening.
Check the blade mounts.
WARNING!
Blades are sharp. Protect your hands with gloves and/or wrap blades with a heavy cloth when handling.
IMPORTANT INFORMATION
The sharpening of blades should be carried out by an authorized service workshop.
Blade Replacement
WARNING!
Blades are sharp. Protect your hands with gloves and/or wrap blades with a heavy cloth when handling.
1.Remove blade bolt by turning counterclockwise.
2.Install new or
3.Install and tighten blade bolt securely.
4.Torque blade bolt to 90
IMPORTANT INFORMATION Special blade bolt is heat treated. Replace with a Husqvarna bolt if required.
Do not use lower grade hardware than specified.
3 |
1 |
2 |
1.Blade
2.Blade bolt (special)
3.Cutter housing
Blade attachment
48