Husqvarna PZ6030CV / 966061101, PZ6034FX / 966516801, PZ6029PFX / 966062201 Neutral Adjustments

maintenance

6.Engage the park brake. Measure the distance between the D brake bolt and the brake swivel. The distance should be 1/8"-¼".

7.If adjustments are needed, loosen C jam nut. Turn the brake bolt until the distance is correct. Retighten C jam nuts.

Neutral Adjustments

WARNING!

Neutral adjustments are made with the rear tires able to rotate. Do not wear loose clothing or jewelry and keep hands and feet away from tires.

Neutral adjustments are made with the rear wheels off the ground and able to rotate, which is done with the engine running.

1.Using a jack stand, raise the rear of the mower up off the ground enough so the tires can rotate freely. Make sure the machine is securely supported.

2.Lift the seat and rotate fully forward until supported by the seat rod.

3.Unplug the safety switch and harness from the seat.

4.Using two 9/16" wrenches, loosen the jam nut next to the turnbuckle. (See illustration.)

5.Hold down the safety switch plunger and start the engine. Continue to hold the plunger down during the next two steps.

6.Keeping the drive levers in the neutral lock position, release the parking brake. The drive wheels should NOT rotate.

7.If the drive wheels rotate, turn the turnbuckle until the wheels stop. Release plunger to stop the engine.

8.Retighten the jam nut against the turnbuckle.

9.Duplicate procedure for the opposite wheel.

10.After adjustments are made, secure safety switch and lower the seat.

1/8"-¼" gap with park

brake engaged

8065-049

Measure gap

8065-050

Seat safety switch

1

2

8065-049

1.Jam Nut

2.Turnbuckle

Neutral adjustment

45