Husqvarna PZ6030CV / 966061101, PZ6034FX / 966516801 manual Push choke in after starting

OPERATION

11.Push the choke control in gradually when the engine has started. (Gasoline engines only.)

12.Set the desired engine speed with the throttle. Allow the engine to run at a moderate speed, “half throttle”, for 3-5 minutes before loading it too heavily. USE FULL THROTTLE WHEN MOWING (no choke).

WARNING!

Engine exhaust and certain vehicle components contain or emit chemicals considered to cause cancer, birth defects or other reproductive system damage. The engine exhaust contains carbon monoxide, which is an odorless, colorless, poisonous gas. Do not use the machine in enclosed spaces.

8065-004

Push choke in after starting

8065-004

Set the engine speed

33