Husqvarna PF 21 AWD, PR 17 AWD manual Children, Maintenance

Page 10

SAFETY INSTRUCTIONS

•Follow the manufacturer’s recommendations regarding wheel weights or counterbalance weights to increase machine stability.

IMPORTANT INFORMATION

Wheel weights fitted on the rear wheels are recommended when driving on slopes for safer steering and improved manoeuvrability. Consult your dealer concerning the use of wheel weights if you are unsure. Wheel weights can not be used on AWD-machines. Use counterweights.

Children

•Serious accidents may occur if you fail to be on your guard for children in the vicinity of the machine. Children are often attracted to the machine and mowing. Never assume that children will remain where you last saw them.

•Keep children away from the area to be mowed and under close supervision by another adult.

•Keep an eye out and shut off the machine if children enter the work area.

•Before and during reversing procedures, look behind you and down for small children.

•Never allow children to ride along. They can fall off and seriously injure themselves or be in the way for safe manoeuvring of the machine.

•Never allow children to operate the machine.

•Be particularly careful near corners, bushes, trees or other objects that block your view.

Maintenance

•Stop the engine. Prevent starting by removing the ignition cable from the spark plug or remove the ignition key before making any adjustments or carrying out maintenance.

•Never fill the fuel tank indoors.

•Petrol and petrol fumes are poisonous and extremely flammable. Be especially careful when handling petrol, as carelessness can result in personal injury or fire.

•Only store fuel in containers approved for the purpose.

•Never remove the fuel cap and fill the petrol tank while the engine is running.

•Allow the engine to cool before refuelling. Do not smoke. Do not fill petrol in the vicinity of sparks or naked flames.

•Handle oil, oil filters, fuel and the battery carefully, of environmental considerations. Follow the local recycling requirements.

•Electrical shocks can cause injuries. Do not touch cables when the engine is running. Do not test the ignition system with your fingers.

WARNING! The engine and the exhaust

!system become very hot during operation. Risk of burn injuries if touched.

•If leaks arise in the fuel system, the engine must not be started until the problem has been resolved.

•Store the machine and fuel in such a way that there is no risk that leaking fuel or fumes can cause any damage.

•Check the fuel level before each use and leave space for the fuel to expand, because the heat from the engine and the sun may otherwise cause the fuel to expand and overflow.

•Avoid overfilling. If you spill petrol on the machine, wipe up the spill and wait until it has evaporated before starting the engine. If you spill on your clothing, change your clothing.

•Allow the machine to cool before performing any actions in the engine compartment.

WARNING! The battery contains lead and

!lead pollutants, chemicals that are considered to cause cancer, birth defects or other reproductive impairment. Wash your hands after touching the battery.

•Be especially careful when handling battery acid. Acid on the skin can cause serious corrosive injuries. In the event of spillage on the skin wash immediately with water.

•Acid in the eyes can cause blindness, contact a doctor immediately.

•Take care with battery maintenance. Explosive gases form in the battery. Never perform maintenance on the battery while smoking or in the vicinity of open flames or sparks. This can cause the battery to explode and cause serious injuries.

10 – English

Page 9 Page 11
Image 10
Page 9 Page 11
Contents PR 17 PR 17 AWD PF 21 PF 21 AWD Contents Pre-delivery service Service journalAfter the first 8 hours Driving and transport on public roads IntroductionDear Customer TowingGood service Serial NumberKEY to Symbols SymbolsBrake Starting instructions Insure your Rider Safety InstructionsSafety instructions General useDriving on slopes This is what you doMaintenance ChildrenTransport What is WHAT? Location of the controlsPresentation Lever for hydraulic lift of attachments Cutting unitMechanical Lifting Lever for Cutting Unit Seat Cutting height adjustment leverExercise care and refuel outdoors see safety instructions FuellingClutch control PR 17 AWD and PF 21 AWD Lights and power outletRelease lever Clutch control PR 17 and PFBefore starting DrivingCutting tips Start the engineConnecting the jump leads Starting the engine with a weak batteryRemove the cables in the reverse order Driving the Rider BrakingStop the engine Page Maintenance Maintenance scheduleBefore starting Maintenance Once aCleaning Removing of the machine hoodsAdjusting the parking brake PR 17 AWD, PF 21 AWD Checking and adjusting the steering wiresAdjusting the parking brake PR 17, PF Can result in reduced braking abilityChecking and adjusting the choke wire Checking and adjusting of throttle wireReplacement of fuel filter Replacing the air filter Checking the fuel pump’s air filterChecking the transmission’s air intake Cool before starting to replace the air filterIgnition system Check the level of the battery acidCleaning the engine and muffler Replacing the spark plugCheck the safety system Main fuse Replacing the light bulbsChecking the tyre pressure Replacing the rear drive belt PR 17 and PF When the engine is running. Mind your fingersChecking the engine’s cooling air intake RemovalAssembly Replacing the centre belt Fitting the cutting head Replacing the front beltTrapping your hand Removing the cutting unit Checking the cutting unit’s parallelism Adjusting the parallelism of the cutting unitReplacing the cutting unit belts Service position for the cutting unit Placing in the service positionChecking the blades Restoring from service positionRemoving the BioClip plug Lubrication Throttle and choke cables, lever bearings Lubricating the belt adjusterDriver seat Checking the engine’s oil levelChanging the oil filter Lubricate the hydrostatic cable with linksReplacing the engine oil Parking brake cable PR 17 AWD and PF 21 AWD Hydraulic oil filter changeParking brake cable PR 17 and PF Checking the transmission oil levelTroubleshooting schedule Problem ProcedureElectrical and Hydraulic Systems PR 17 and PR 17 AWDPF 21 and PF 21 AWD Wiring diagram Hydraulic System PR 17, PR 17 AWD, PFWinter storage ServiceStorage GuardTechnical data ´z+S¶6@¨ 50 English´z+S¶6@¨ EC-declaration of conformity Applies to Europe only Cutting unit CombiTurf1151089-26 ´z+S¶6@¨ ´z+S¶6@¨

PR 17, PF 21, PR 17 AWD, PF 21 AWD specifications

The Husqvarna PR 17, PR 17 AWD, PF 21, and PF 21 AWD are advanced pressure washers designed to deliver optimal performance, versatility, and convenience for various cleaning tasks. These models are engineered to cater to both residential and professional users, ensuring that maintaining cleanliness becomes an effortless task.

The Husqvarna PR 17 is a powerful pressure washer that sports a robust design, making it ideal for tackling medium to heavy-duty cleaning jobs. With a maximum pressure output of 1700 PSI and a flow rate of 1.2 GPM, it can efficiently clean driveways, patios, and vehicles. The PR 17 is equipped with an adjustable spray nozzle, providing users with the option to switch between different spray patterns, enhancing its versatility for different surfaces.

For those looking for added traction and stability, the PR 17 AWD (All-Wheel Drive) variant features a sophisticated four-wheel drive system. This technology ensures enhanced maneuverability over uneven terrains and difficult surfaces. The AWD feature is particularly beneficial for users who require improved mobility, whether it's on inclines or rough outdoor environments.

Moving to the PF 21 series, the Husqvarna PF 21 and PF 21 AWD both offer exceptional cleaning performance with their impressive specifications. The PF 21 boasts a powerful motor capable of delivering up to 2100 PSI, making it suitable for more demanding tasks. With a generous flow rate of 1.4 GPM, it can easily remove dirt and grime from larger areas efficiently. The PF 21 comes equipped with a set of interchangeable nozzles, allowing users to adjust the pressure according to their specific cleaning needs.

The PF 21 AWD model adds the all-wheel drive feature, enhancing the user experience by making it easier to navigate while cleaning larger spaces. This model is perfect for professionals and homeowners who require a reliable machine for frequent use. The ergonomic design of both PF 21 models ensures ease of handling and minimizes user fatigue, even during extended cleaning sessions.

These Husqvarna pressure washers also prioritize durability and maintenance ease. With features such as durable steel frames and easily accessible components, users can expect a long lifespan and hassle-free upkeep.

In summary, whether you choose the PR 17, PR 17 AWD, PF 21, or PF 21 AWD, each model offers unique features tailored to a range of cleaning tasks. Their combination of power, technology, and user-friendly designs make them an excellent choice for anyone looking to achieve spotless results.
Top Page Image Contents