Husqvarna PR 17 AWD, PF 21 AWD manual Presentation

Page 13

PRESENTATION

Presentation

Congratulations on your choice of an excellent quality product that will give you great pleasure for many years. This operator’s manual describes PR 17, PR 17 AWD, PF 21 and PF 21 AWD. The machines are equipped with a four-stroke V- Twin engine from Kawasaki.

Speed limiter

The speed of the machine is steplessly regulated with two pedals. Pedal (1) is used to drive forwards, and pedal (2) to drive backwards.

2

1

The machines are equipped with power steering and hydraulic lifts. PR 17 AWD and PF 21 AWD also have all wheel drive.

The power transmission from the engine is handled by a hydrostatic gearbox, which allows variable variation of the speed by using the pedals. One pedal for driving forward and one for reverse.

Throttle control

The throttle control regulates the engine speed, and thereby also the rotation speed of the blades.

To increase or reduce the engine speed the control is moved forwards or backwards.

Avoid idling the engine for long periods, as there is a risk of carbon build-up on the spark plugs.

Choke control

The choke lever is used for cold starting and to give the engine a richer fuel mixture.

For cold starting the lever is moved backwards to its end position.

WARNING! Make sure that branches do not

!obstruct the pedals when mowing under bushes. Otherwise there is a risk you may lose control.

Counter

The chronometer shows how many hours the engine has been running.

Any time when the engine is not running but the ignition is switched on is not registered.The last digit shows tenths of an hour (6 minutes).

Parking brake

The parking brake is applied as follows:

2

1

1Press down the parking brake pedal (1).

2Press in the lock button (2) on the steering column.

3Release the parking brake pedal while keeping the button pressed in.

The parking brake lock disengages automatically when the brake pedal is pressed.

English – 13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents PR 17 PR 17 AWD PF 21 PF 21 AWD Contents Pre-delivery service Service journalAfter the first 8 hours Dear Customer IntroductionDriving and transport on public roads TowingSerial Number Good serviceSymbols KEY to SymbolsBrake Starting instructions Safety instructions Safety InstructionsInsure your Rider General useThis is what you do Driving on slopesChildren MaintenanceTransport Location of the controls What is WHAT?Presentation Lever for hydraulic lift of attachments Cutting unitMechanical Lifting Lever for Cutting Unit Exercise care and refuel outdoors see safety instructions Cutting height adjustment leverSeat FuellingRelease lever Lights and power outletClutch control PR 17 AWD and PF 21 AWD Clutch control PR 17 and PFCutting tips DrivingBefore starting Start the engineConnecting the jump leads Starting the engine with a weak batteryRemove the cables in the reverse order Braking Driving the RiderStop the engine Page Maintenance schedule MaintenanceOnce a Before starting MaintenanceRemoving of the machine hoods CleaningAdjusting the parking brake PR 17, PF Checking and adjusting the steering wiresAdjusting the parking brake PR 17 AWD, PF 21 AWD Can result in reduced braking abilityChecking and adjusting the choke wire Checking and adjusting of throttle wireReplacement of fuel filter Checking the transmission’s air intake Checking the fuel pump’s air filterReplacing the air filter Cool before starting to replace the air filterCleaning the engine and muffler Check the level of the battery acidIgnition system Replacing the spark plugCheck the safety system Main fuse Replacing the light bulbsChecking the tyre pressure Checking the engine’s cooling air intake When the engine is running. Mind your fingersReplacing the rear drive belt PR 17 and PF RemovalAssembly Replacing the centre belt Fitting the cutting head Replacing the front beltTrapping your hand Removing the cutting unit Checking the cutting unit’s parallelism Adjusting the parallelism of the cutting unitReplacing the cutting unit belts Placing in the service position Service position for the cutting unitChecking the blades Restoring from service positionRemoving the BioClip plug Lubrication Driver seat Lubricating the belt adjusterThrottle and choke cables, lever bearings Checking the engine’s oil levelChanging the oil filter Lubricate the hydrostatic cable with linksReplacing the engine oil Parking brake cable PR 17 and PF Hydraulic oil filter changeParking brake cable PR 17 AWD and PF 21 AWD Checking the transmission oil levelProblem Procedure Troubleshooting schedulePR 17 and PR 17 AWD Electrical and Hydraulic SystemsPF 21 and PF 21 AWD Wiring diagram PR 17, PR 17 AWD, PF Hydraulic SystemStorage ServiceWinter storage GuardTechnical data ´z+S¶6@¨ 50 English´z+S¶6@¨ Cutting unit CombiTurf EC-declaration of conformity Applies to Europe only1151089-26 ´z+S¶6@¨ ´z+S¶6@¨

PR 17, PF 21, PR 17 AWD, PF 21 AWD specifications

The Husqvarna PR 17, PR 17 AWD, PF 21, and PF 21 AWD are advanced pressure washers designed to deliver optimal performance, versatility, and convenience for various cleaning tasks. These models are engineered to cater to both residential and professional users, ensuring that maintaining cleanliness becomes an effortless task.

The Husqvarna PR 17 is a powerful pressure washer that sports a robust design, making it ideal for tackling medium to heavy-duty cleaning jobs. With a maximum pressure output of 1700 PSI and a flow rate of 1.2 GPM, it can efficiently clean driveways, patios, and vehicles. The PR 17 is equipped with an adjustable spray nozzle, providing users with the option to switch between different spray patterns, enhancing its versatility for different surfaces.

For those looking for added traction and stability, the PR 17 AWD (All-Wheel Drive) variant features a sophisticated four-wheel drive system. This technology ensures enhanced maneuverability over uneven terrains and difficult surfaces. The AWD feature is particularly beneficial for users who require improved mobility, whether it's on inclines or rough outdoor environments.

Moving to the PF 21 series, the Husqvarna PF 21 and PF 21 AWD both offer exceptional cleaning performance with their impressive specifications. The PF 21 boasts a powerful motor capable of delivering up to 2100 PSI, making it suitable for more demanding tasks. With a generous flow rate of 1.4 GPM, it can easily remove dirt and grime from larger areas efficiently. The PF 21 comes equipped with a set of interchangeable nozzles, allowing users to adjust the pressure according to their specific cleaning needs.

The PF 21 AWD model adds the all-wheel drive feature, enhancing the user experience by making it easier to navigate while cleaning larger spaces. This model is perfect for professionals and homeowners who require a reliable machine for frequent use. The ergonomic design of both PF 21 models ensures ease of handling and minimizes user fatigue, even during extended cleaning sessions.

These Husqvarna pressure washers also prioritize durability and maintenance ease. With features such as durable steel frames and easily accessible components, users can expect a long lifespan and hassle-free upkeep.

In summary, whether you choose the PR 17, PR 17 AWD, PF 21, or PF 21 AWD, each model offers unique features tailored to a range of cleaning tasks. Their combination of power, technology, and user-friendly designs make them an excellent choice for anyone looking to achieve spotless results.
Top Page Image Contents