Husqvarna PR 17, PF 21 AWD manual Service journal, Pre-delivery service, After the first 8 hours

Page 3

Service journal

Pre-delivery service

1 Top up battery with acid and charge for four hours.

2 Fit the venting hose on the battery.

3Fit steering wheel, seat and any optional equipment.

4Adjust cutting unit:

Adjust lift springs (effective weight of cutting unit should be 12-15kg / 26.5-33 lb).

Adjust cutting unit so that rear edge is about 2-4 mm / 1/8” higher than front edge.

Adjust cutting unit height setting so that cutting height limit is 5 mm / 3/16” above the frame of the unit at the lowest cutting height.

5 Check that the right amount of oil is in the engine.

6 Check that there is oil in the transmission’s oil tank.

7 Check and adjust tyre pressure (60 Kpa, 0.6 bar).

8 Connect battery.

9 Fill with fuel and start engine.

10Check that machine does not move in neutral.

11Check:

Forward drive.

Reverse drive.

Operation of blades.

Seat safety switch.

Lif lever safety switch.

The safety switch for the hydrostat pedals.

12Bleed the hydraulic system of excess air, top up with oil if necessary.

13Check engine speed, 2900±100 rpm.

14Tell customer about:

Needs and benefits of following the service schedule.

Servicing and the influence of this journal on the second-hand value of the machine.

Range of applications for BioClip.

Complete proof of sale etc.

Pre-delivery service carried out. No outstanding problems. Certified:

Date, mileage, stamp, signature

After the first 8 hours

1 Change engine oil

English – 3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents PR 17 PR 17 AWD PF 21 PF 21 AWD Contents Service journal Pre-delivery serviceAfter the first 8 hours Towing IntroductionDear Customer Driving and transport on public roadsSerial Number Good serviceSymbols KEY to SymbolsBrake Starting instructions General use Safety InstructionsSafety instructions Insure your RiderThis is what you do Driving on slopesChildren MaintenanceTransport Location of the controls What is WHAT?Presentation Cutting unit Lever for hydraulic lift of attachmentsMechanical Lifting Lever for Cutting Unit Fuelling Cutting height adjustment leverExercise care and refuel outdoors see safety instructions SeatClutch control PR 17 and PF Lights and power outletRelease lever Clutch control PR 17 AWD and PF 21 AWDStart the engine DrivingCutting tips Before startingStarting the engine with a weak battery Connecting the jump leadsRemove the cables in the reverse order Braking Driving the RiderStop the engine Page Maintenance schedule MaintenanceOnce a Before starting MaintenanceRemoving of the machine hoods CleaningCan result in reduced braking ability Checking and adjusting the steering wiresAdjusting the parking brake PR 17, PF Adjusting the parking brake PR 17 AWD, PF 21 AWDChecking and adjusting of throttle wire Checking and adjusting the choke wireReplacement of fuel filter Cool before starting to replace the air filter Checking the fuel pump’s air filterChecking the transmission’s air intake Replacing the air filterReplacing the spark plug Check the level of the battery acidCleaning the engine and muffler Ignition systemCheck the safety system Replacing the light bulbs Main fuseChecking the tyre pressure Removal When the engine is running. Mind your fingersChecking the engine’s cooling air intake Replacing the rear drive belt PR 17 and PFAssembly Replacing the centre belt Replacing the front belt Fitting the cutting headTrapping your hand Removing the cutting unit Adjusting the parallelism of the cutting unit Checking the cutting unit’s parallelismReplacing the cutting unit belts Placing in the service position Service position for the cutting unitRestoring from service position Checking the bladesRemoving the BioClip plug Lubrication Checking the engine’s oil level Lubricating the belt adjusterDriver seat Throttle and choke cables, lever bearingsLubricate the hydrostatic cable with links Changing the oil filterReplacing the engine oil Checking the transmission oil level Hydraulic oil filter changeParking brake cable PR 17 and PF Parking brake cable PR 17 AWD and PF 21 AWDProblem Procedure Troubleshooting schedulePR 17 and PR 17 AWD Electrical and Hydraulic SystemsPF 21 and PF 21 AWD Wiring diagram PR 17, PR 17 AWD, PF Hydraulic SystemGuard ServiceStorage Winter storageTechnical data ´z+S¶6@¨ 50 English´z+S¶6@¨ Cutting unit CombiTurf EC-declaration of conformity Applies to Europe only1151089-26 ´z+S¶6@¨ ´z+S¶6@¨

PR 17, PF 21, PR 17 AWD, PF 21 AWD specifications

The Husqvarna PR 17, PR 17 AWD, PF 21, and PF 21 AWD are advanced pressure washers designed to deliver optimal performance, versatility, and convenience for various cleaning tasks. These models are engineered to cater to both residential and professional users, ensuring that maintaining cleanliness becomes an effortless task.

The Husqvarna PR 17 is a powerful pressure washer that sports a robust design, making it ideal for tackling medium to heavy-duty cleaning jobs. With a maximum pressure output of 1700 PSI and a flow rate of 1.2 GPM, it can efficiently clean driveways, patios, and vehicles. The PR 17 is equipped with an adjustable spray nozzle, providing users with the option to switch between different spray patterns, enhancing its versatility for different surfaces.

For those looking for added traction and stability, the PR 17 AWD (All-Wheel Drive) variant features a sophisticated four-wheel drive system. This technology ensures enhanced maneuverability over uneven terrains and difficult surfaces. The AWD feature is particularly beneficial for users who require improved mobility, whether it's on inclines or rough outdoor environments.

Moving to the PF 21 series, the Husqvarna PF 21 and PF 21 AWD both offer exceptional cleaning performance with their impressive specifications. The PF 21 boasts a powerful motor capable of delivering up to 2100 PSI, making it suitable for more demanding tasks. With a generous flow rate of 1.4 GPM, it can easily remove dirt and grime from larger areas efficiently. The PF 21 comes equipped with a set of interchangeable nozzles, allowing users to adjust the pressure according to their specific cleaning needs.

The PF 21 AWD model adds the all-wheel drive feature, enhancing the user experience by making it easier to navigate while cleaning larger spaces. This model is perfect for professionals and homeowners who require a reliable machine for frequent use. The ergonomic design of both PF 21 models ensures ease of handling and minimizes user fatigue, even during extended cleaning sessions.

These Husqvarna pressure washers also prioritize durability and maintenance ease. With features such as durable steel frames and easily accessible components, users can expect a long lifespan and hassle-free upkeep.

In summary, whether you choose the PR 17, PR 17 AWD, PF 21, or PF 21 AWD, each model offers unique features tailored to a range of cleaning tasks. Their combination of power, technology, and user-friendly designs make them an excellent choice for anyone looking to achieve spotless results.
Top Page Image Contents