Husqvarna PF 21 AWD manual Lights and power outlet, Release lever, Clutch control PR 17 and PF

Page 16

PRESENTATION

Lights and power outlet

PR 17 and PR 17 AWD

2 3

1

PF 21 and PF 21 AWD

2 3

1

The lights are switched on and off using the power switch (1) on the control panel.

A seat heater or mobile phone charger are examples of articles that can be connected to the power socket (2).

The power outlet is switched on and off using power switch (3) on the control panel.

The voltage is 12 V.

The power outlet is fuse protected by its own fuse, which is located below the ignition switch.

Release lever

The release control must be pulled out in order for the machine to be moved when the engine is shutoff.

Should you attempt to drive the machine with the clutch controls pulled out it will not move. The drive on the axle is disengaged when one of the controls is pulled out.

Pull the controls to the end positions, do not use an intermediate position.

Clutch control PR 17 AWD and PF 21 AWD

PR 17 AWD and PF 21 AWD have one control for the front axle and one control for the rear axle.

IMPORTANT! Always drive the machine with both clutch controls pressed in.

•Clutch control, rear axle

- Control drawn out, drive system disengaged.

-Control depressed, drive system engaged.

•Clutch control, front axle

The control is positioned on the inside of the left front wheel.

-Rear control (pulled out), drive system disengaged.

-Front control (pushed in), drive system engaged.

Clutch control PR 17 and PF 21

•Pull out the control to disengage the drive system.

•Push in the control to engage to the drive system.

16 – English

Page 15 Page 17
Image 16
Page 15 Page 17
Contents PR 17 PR 17 AWD PF 21 PF 21 AWD Contents Pre-delivery service Service journalAfter the first 8 hours Introduction Dear CustomerDriving and transport on public roads TowingGood service Serial NumberKEY to Symbols SymbolsBrake Starting instructions Safety Instructions Safety instructionsInsure your Rider General useDriving on slopes This is what you doMaintenance ChildrenTransport What is WHAT? Location of the controlsPresentation Lever for hydraulic lift of attachments Cutting unitMechanical Lifting Lever for Cutting Unit Cutting height adjustment lever Exercise care and refuel outdoors see safety instructionsSeat FuellingLights and power outlet Release leverClutch control PR 17 AWD and PF 21 AWD Clutch control PR 17 and PFDriving Cutting tipsBefore starting Start the engineConnecting the jump leads Starting the engine with a weak batteryRemove the cables in the reverse order Driving the Rider BrakingStop the engine Page Maintenance Maintenance scheduleBefore starting Maintenance Once aCleaning Removing of the machine hoodsChecking and adjusting the steering wires Adjusting the parking brake PR 17, PFAdjusting the parking brake PR 17 AWD, PF 21 AWD Can result in reduced braking abilityChecking and adjusting the choke wire Checking and adjusting of throttle wireReplacement of fuel filter Checking the fuel pump’s air filter Checking the transmission’s air intakeReplacing the air filter Cool before starting to replace the air filterCheck the level of the battery acid Cleaning the engine and mufflerIgnition system Replacing the spark plugCheck the safety system Main fuse Replacing the light bulbsChecking the tyre pressure When the engine is running. Mind your fingers Checking the engine’s cooling air intakeReplacing the rear drive belt PR 17 and PF RemovalAssembly Replacing the centre belt Fitting the cutting head Replacing the front beltTrapping your hand Removing the cutting unit Checking the cutting unit’s parallelism Adjusting the parallelism of the cutting unitReplacing the cutting unit belts Service position for the cutting unit Placing in the service positionChecking the blades Restoring from service positionRemoving the BioClip plug Lubrication Lubricating the belt adjuster Driver seatThrottle and choke cables, lever bearings Checking the engine’s oil levelChanging the oil filter Lubricate the hydrostatic cable with linksReplacing the engine oil Hydraulic oil filter change Parking brake cable PR 17 and PFParking brake cable PR 17 AWD and PF 21 AWD Checking the transmission oil levelTroubleshooting schedule Problem ProcedureElectrical and Hydraulic Systems PR 17 and PR 17 AWDPF 21 and PF 21 AWD Wiring diagram Hydraulic System PR 17, PR 17 AWD, PFService StorageWinter storage GuardTechnical data ´z+S¶6@¨ 50 English´z+S¶6@¨ EC-declaration of conformity Applies to Europe only Cutting unit CombiTurf1151089-26 ´z+S¶6@¨ ´z+S¶6@¨

PR 17, PF 21, PR 17 AWD, PF 21 AWD specifications

The Husqvarna PR 17, PR 17 AWD, PF 21, and PF 21 AWD are advanced pressure washers designed to deliver optimal performance, versatility, and convenience for various cleaning tasks. These models are engineered to cater to both residential and professional users, ensuring that maintaining cleanliness becomes an effortless task.

The Husqvarna PR 17 is a powerful pressure washer that sports a robust design, making it ideal for tackling medium to heavy-duty cleaning jobs. With a maximum pressure output of 1700 PSI and a flow rate of 1.2 GPM, it can efficiently clean driveways, patios, and vehicles. The PR 17 is equipped with an adjustable spray nozzle, providing users with the option to switch between different spray patterns, enhancing its versatility for different surfaces.

For those looking for added traction and stability, the PR 17 AWD (All-Wheel Drive) variant features a sophisticated four-wheel drive system. This technology ensures enhanced maneuverability over uneven terrains and difficult surfaces. The AWD feature is particularly beneficial for users who require improved mobility, whether it's on inclines or rough outdoor environments.

Moving to the PF 21 series, the Husqvarna PF 21 and PF 21 AWD both offer exceptional cleaning performance with their impressive specifications. The PF 21 boasts a powerful motor capable of delivering up to 2100 PSI, making it suitable for more demanding tasks. With a generous flow rate of 1.4 GPM, it can easily remove dirt and grime from larger areas efficiently. The PF 21 comes equipped with a set of interchangeable nozzles, allowing users to adjust the pressure according to their specific cleaning needs.

The PF 21 AWD model adds the all-wheel drive feature, enhancing the user experience by making it easier to navigate while cleaning larger spaces. This model is perfect for professionals and homeowners who require a reliable machine for frequent use. The ergonomic design of both PF 21 models ensures ease of handling and minimizes user fatigue, even during extended cleaning sessions.

These Husqvarna pressure washers also prioritize durability and maintenance ease. With features such as durable steel frames and easily accessible components, users can expect a long lifespan and hassle-free upkeep.

In summary, whether you choose the PR 17, PR 17 AWD, PF 21, or PF 21 AWD, each model offers unique features tailored to a range of cleaning tasks. Their combination of power, technology, and user-friendly designs make them an excellent choice for anyone looking to achieve spotless results.
Top Page Image Contents