Husqvarna MZ6128/966613103 warranty Risk of sparking

Page 15

SAFETY

Sparking can occur when working with the battery and the heavy cables of the starter circuit. This can cause battery explosion, fire or eye injury. Sparking in this circuit can not occur after the chassis cable (normally negative, black) is removed from the battery.

WARNING!

Avoid electrical sparking and its consequences by the following routines:

Use protective goggles.

Ensure that the fuel filler cap is mounted tightly and no flammable substances are stored in an open vessel.

Never work with the starter circuit if there is spilled fuel.

Disconnect the negative cable from the battery first and reconnect it last.

Do not make a bridge short circuit across the starter relay to run the starter.

Never use the machine indoors or in spaces lacking proper ventilation. The exhaust fumes contain carbon monoxide, an odorless, poisonous, and lethal gas.

Stop to inspect the equipment if the machine runs over or into anything. If necessary, make repairs before starting.

Never make adjustments with the engine running.

The machine is tested and approved only with the equipment originally provided or recommended by the manufacturer. Only use approved repair parts for the machine.

The blades are sharp and can cause cuts and gashes. Wrap the blades or use protective gloves when handling them.

Check the parking brake’s functionality regularly. Adjust and service as necessary.

The mulch blades should only be used in familiar areas when higher quality mowing is desired.

Reduce the risk of fire by removing grass, leaves, and other debris that may have accumulated on the machine.

Allow the machine to cool before putting it in storage.

Regularly clean deck and underside of deck, avoid spraying engine and electrical components with water.

6003-009

Do not smoke when performing maintenance on the battery. The battery can explode and cause serious injury/damage.

8009-728

Risk of sparking

8011-514

Regularly clean deck

15

Image 15
Contents Operator Manual All rights reserved Contents Page Introduction Manufacturing Number Good ServiceXxxx xxxxxx xxxxx xxxx Xxxxxx xxxxxxxxx. xx xxxxxxxx Symbols and DecalsWhole body Safety Safety InstructionsGeneral Operation Never take passengers Slope Operation Personal Safety EquipmentBe extra cautious when driving on slopes Safe Handling of Gasoline General Maintenance Risk of sparking Spark Arrestor TransportControl Locations ControlsMotion Control Levers Hour Meter Choke ControlTracking Knob Blade Switch Ignition SwitchParking Brake Fuses Cutting Height Adjuster Seat Adjustment LeverFuel Shut Off Valve Hydro Release Levers Fuel TankOperation TrainingSteering Before Starting Starting the Engine Open the fuel tank valve Press in and turn the ignition key to the start position To remove cables, reverse order Weak BatteryRunning Operating on Hills Stopping the Engine Mowing Tips Moving Machine By Hand Maintenance Schedule MaintenanceMaintenance Replacing battery BatteryTire Pressures Safety SystemDeck Belt Installation Deck BeltDeck Belt Removal Replacing Pump Belt Belt InstallationPump Belt BeltsCutting Blades Leveling deck Adjusting the Mower DeckAnti-scalp rollers Hardware CleaningUse protective glasses when cleaning and washing Caster WheelsLubrication Lubrication ScheduleGeneral Deck Spindles Wheel and Deck ZerksFront Wheel Mount Front Wheel BearingsTransaxle Transmission Fluid Change Problem Cause Troubleshooting GuideTroubleshooting Guide Service StorageWinter Storage Wiring Diagram Standard Hardware Technical DataTorque Specifications Hex Head Cap ScrewsEngine MZ6128USA requirements Conformity CertificatesStamp, sign Service JournalDelivery Service ActionDate, mtr reading Stamp, sign After 10 hoursDaily Service Hour Service Service Journal Service Journal At least once each year Action Date, mtr reading Stamp, sign Page 115 523327 Rev a 2012-09-15