Husqvarna MZ6128/966613103 warranty Press in and turn the ignition key to the start position

OPERATION

8. Press in and turn the ignition key to the start position.

IMPORTANT INFORMATION

Do not run the starter for more than 5 seconds each time. If the engine does not start, wait about 10 seconds before retrying.

Turn to the start position

8050-780

9.When the engine starts, immediately release the ignition key back to the run position.

10.Slowly push in the choke control knob, if it was used to start a cold engine.

WARNING!

Engine exhaust and certain vehicle components contain or emit chemicals considered to cause cancer, birth defects or other reproductive system damage. The engine exhaust contains carbon monoxide, which is an odorless, colorless, poisonous gas. Do not use the machine in enclosed spaces.

Return to run position

8050-781

11. Set the engine speed with the throttle. Allow the engine to run at a moderate speed, approximately mid throttle, for 3-5 minutes before loading it too heavily. USE FULL THROTTLE WHEN MOWING (no choke).

Set the throttle

8058-216

28