Husqvarna MZ6128/966613103 warranty Operating on Hills

Page 31

OPERATION

Operating on Hills

Read the Safety Instructions Driving on Slopes in the Safety Instructions.

WARNING!

Do not drive up or down hills with slopes greater than 10 degrees. Do not drive across slopes.

1.Use the slowest speed possible before starting up or down hills.

2.Avoid stopping or changing speed on hills.

3.If stopping is absolutely necessary, pull drive levers into the neutral position and push to the outside of the unit and engage the parking brake.

4.To restart movement, release the parking brake.

5.Pull the control levers back to the center of the mower and press forward to regain forward motion.

6.Make all turns slowly.

IMPORTANT INFORMATION

Control levers return to neutral when released. This may cause the mower to suddenly stop.

8058-208

Place controls in neutral position

8058-182

Release the parking brake to restart movement

31

Image 31
Contents Operator Manual All rights reserved Contents Page Introduction Manufacturing Number Good ServiceXxxx xxxxxx xxxxx xxxx Xxxxxx xxxxxxxxx. xx xxxxxxxx Symbols and DecalsWhole body Safety Instructions SafetyGeneral Operation Never take passengers Slope Operation Personal Safety EquipmentBe extra cautious when driving on slopes Safe Handling of Gasoline General Maintenance Risk of sparking Spark Arrestor TransportControl Locations ControlsMotion Control Levers Choke Control Hour MeterTracking Knob Ignition Switch Blade SwitchParking Brake Fuses Seat Adjustment Lever Cutting Height AdjusterFuel Shut Off Valve Hydro Release Levers Fuel TankTraining OperationSteering Before Starting Starting the Engine Open the fuel tank valve Press in and turn the ignition key to the start position To remove cables, reverse order Weak BatteryRunning Operating on Hills Stopping the Engine Mowing Tips Moving Machine By Hand Maintenance Schedule MaintenanceMaintenance Replacing battery BatteryTire Pressures Safety SystemDeck Belt Deck Belt InstallationDeck Belt Removal Replacing Pump Belt Belt InstallationPump Belt BeltsCutting Blades Leveling deck Adjusting the Mower DeckAnti-scalp rollers Hardware CleaningUse protective glasses when cleaning and washing Caster WheelsLubrication Schedule LubricationGeneral Deck Spindles Wheel and Deck ZerksFront Wheel Mount Front Wheel BearingsTransaxle Transmission Fluid Change Problem Cause Troubleshooting GuideTroubleshooting Guide Storage ServiceWinter Storage Wiring Diagram Standard Hardware Technical DataTorque Specifications Hex Head Cap ScrewsEngine MZ6128USA requirements Conformity CertificatesStamp, sign Service JournalDelivery Service ActionDate, mtr reading Stamp, sign After 10 hoursDaily Service Hour Service Service Journal Service Journal At least once each year Action Date, mtr reading Stamp, sign Page 115 523327 Rev a 2012-09-15